FDA Reg. 3039441248 · EU MDR · UK MHRA · ISO 13485
9:30–18:00 China time (UTC+8)

Category Dental Knowledge

Zirconia in Dentistry: A Clinical Guide for Dentists and Labs

Zirconia in dentistry isn't one material anymore. It's a family of ceramics that runs from opaque, very strong 3Y through translucent 5Y to multilayer blanks that combine the two, and each one behaves differently under load, at the margin and against the shade tab. Which zirconia goes on the prescription, and how the crown is handled at the chair, decide the result as much as the brand on the disc.

Temporary Teeth: A Clinical Guide to Types, Materials and Wear Time

Temporary teeth carry a patient from a prep, an extraction or implant surgery to the final restoration. Patients call them temp teeth; prosthodontists call them interim or provisional prostheses. The Glossary of Prosthodontic Terms gives them two jobs: provide esthetics, stability and function for a limited time, and help work out the form and function of the definitive restoration. The second job is the one that most often goes to waste.

Cementing Veneers: Match the Protocol to the Veneer

Cementing veneers is really adhesive bonding. A thin ceramic shell on a prep with almost no retention form stays put only because resin cement locks onto both the tooth and the ceramic. Most of the decisions in that chain depend on the veneer itself: which ceramic it is, how thick and translucent it is, and what stump it has to cover.

Cementing Zirconia Crowns: Luted or Bonded?

When cementing zirconia crowns, the first question is about the prep, not the cement. If the preparation has good height, taper and resistance form, the crown can be luted with a resin-modified glass ionomer or a self-adhesive resin cement, and the cement brand matters less than you might expect. If the prep is short or over-tapered, or the restoration covers only part of the tooth, retention has to come from a true adhesive bond to zirconia, and that takes a specific protocol.

Precision Attachment Dentures, Clasps or Locators: Choose by What the Denture Holds

Every removable partial or overdenture has to hold on to something in the mouth. Dentures with clasps grip undercuts on natural teeth. A precision attachment denture locks into a connector built into a crown. A Locator denture snaps onto a stud on an implant, or on a prepared root. Which one suits a case depends less on the hardware than on the abutments, the space, the smile line and how the denture will be looked after and repaired years from now.

Cementing Emax Crowns: When to Bond, When to Cement

Cementing emax crowns comes down to one decision you make before you open a syringe: does this crown need a true adhesive bond, or can it be luted? A full-coverage lithium disilicate crown with enough ceramic thickness on a retentive prep can go in with a self-adhesive resin or a conventional cement. If any one of those three conditions is missing, bond it.

Metal-Free Partial Dentures: Match the Design to the Request

When patients ask for metal-free partial dentures, they don't all mean the same thing. Some want no metal anywhere in the mouth. Many just don't want a clasp to show when they smile, and some want to retire an acrylic partial held by wire clasps. Each request leads to a different design, and the difference shows up years later in the abutments and the ridge, not on delivery day.

Occlusal Reduction for PFM Crown Preps: How Much, Where, and How to Confirm It

For occlusal reduction for PFM crown preps on posterior teeth, plan about 2.0 mm over the functional cusps and anywhere a centric contact will sit on porcelain (1.5 mm is the minimum), and 1.0–1.5 mm over the nonfunctional cusps. With a metal occlusal surface, about 1.5 mm on functional cusps and 1.0 mm on nonfunctional cusps is enough. Those numbers only count if you measure them against the opposing teeth, in centric and in excursions, before the scan or impression goes out.

Multilayer Zirconia Crowns: When They’re the Right Call, and When They Aren’t

A multilayer zirconia crown is milled in one piece from a blank whose shade and translucency change from the cervical to the incisal edge. That built-in gradient is what lets a full-contour zirconia crown work in the esthetic zone. It's also why two crowns sold under the same name can behave very differently: the blank decides where the crown is strong, where it's translucent and where it's weakest.