FDA Reg. 3039441248 · EU MDR · UK MHRA · ISO 13485
9:30–18:00 China time (UTC+8)
Denture lab

A Denture Lab That Plans Every Stage Before Your Case Ships

Working with an overseas denture lab shouldn’t mean extra round trips, bite records that flatten in transit or a seat date that keeps slipping. At Istar Digital, the plan comes first. Before a single record ships, we agree with you which workflow suits the case, which try-ins are worth the trip and how each record should travel. Then a removable team that does nothing but dentures and appliances builds and checks every stage in-house, and we cover the shipping back.

Complete and partial dentures on models
About 55 technicians
Working on removable cases only
Up to 6,500 cases a month
Removable capacity in peak season, about 4,000 the rest of the year
1-year warranty
On every removable denture
Return shipping on us
For finished work and remakes
01 · Products

Removable Dentures and Appliances We Make

Upper, lower or both arches, made through a conventional, digital or hybrid workflow, with a wax or digital try-in before final processing.

Immediate Dentures

Made before the extractions and seated the day the teeth come out. The ridge changes as it heals, so plan for a reline or a new denture once healing is complete.

Cobalt-chromium, Vitallium, pure titanium and PEEK frameworks, cast, milled or laser-printed, always built to a design you’ve approved.

Clasp-free partials for selected cases where hidden retention matters or the patient can’t have metal.

Tooth- or implant-retained, on Locator, bar or other attachments ordered to the exact model you specify. Titanium bars, multi-unit abutments, screws and tools are available at extra cost.

Duplicates, Repairs and Relines

Duplicates of an existing denture, plus relines, rebases, added teeth and repairs in resin of the same type as the original, with every repaired joint strength-tested. Because the denture has to travel, a duplicate gives the patient something to wear in the meantime.

Hard, soft and dual-laminate night guards, occlusal and bite splints, and periodontal splints, in the arch, hardness and thickness you prescribe. The target jaw position is checked against your scan and bite record, then again on the articulator.

Custom mouth guards made on the patient’s own model, for a fit that a boil-and-bite guard can’t match.

Hawley retainers, clear vacuum-formed (Essix) retainers and bonded lingual retainers, each labeled for its patient and packed individually.

02 · Workflows

Fewer Trips, Planned From the Start

A denture spends little time in the lab; distance is what adds the days. Routine removable work, from design and wax setup to processing, polishing and inspection, takes 2–3 working days in our lab. Every physical record you send and every try-in we return adds an international trip, so the workflow you choose matters more than the lab time.

Conventional

Custom tray, wax rims, tooth setup for try-in, then final processing. Each of the four lab stages is a round trip, so it pays to book every appointment up front.

Hybrid

Your border-molded final impression travels once; from there we design digitally and process the final base by injection or heat-curing. It’s our answer when a scan can’t capture the borders reliably.

Digital

Scans of both arches and the bite come to us online, so no records ship to us and the case usually finishes 1–2 days sooner. The data stays on file for a duplicate or a remake later.

The Try-In Worth Making

For an edentulous patient, the jaw relation is the one record we always want confirmed in the mouth. We verify it on a wax setup or a provisional try-in before processing, because a wrong vertical dimension or centric relation is far harder to correct once the acrylic is cured. After you approve the setup, shade, surface characterization, minor tooth form and contacts can still change.

Complete dentures and complex framework partials come to you as a design for approval before production, which adds 1–2 working days.

How the Days Are Counted

Lab time runs in working days from the day a complete case reaches us. Waiting for a missing record or an approval doesn’t count, and neither do transit and customs. Send 10 or more cases a month, and rush service is free for every case type; we guarantee the ship date, while arrival still depends on customs. Full terms: Turnaround and Shipping.

03 · Records

Records That Arrive Ready to Use

A distorted impression or a flattened bite costs a whole extra round trip. Three rules keep records usable on the way to our denture laboratory.

Silicone, Not Alginate

Alginate shrinks in transit, can grow mold and may be held at customs. Send VPS, condensation silicone or polyether, or pour alginate preliminary impressions and send the stone models.

PVS Bites, Not Wax

Wax softens in a warm hand or a hot cargo hold, and a softened bite record usually comes out low. For complete-mouth cases, record the bite in PVS bite registration material.

Disinfect, Then Document

Disinfect impressions, bite registrations and occlusal rims before they leave the clinic, as the CDC’s infection control guidelines for dental settings recommend, and note the disinfectant and contact time. Customs in the US, Canada, Australia, New Zealand and most EU countries can hold impressions that may carry contamination. We disinfect every physical case again on arrival and every finished case before it ships back.

→ What to send for each case type, plus file formats and packing: Send a Case guide

04 · Scanning

Scanning Edentulous Arches: When an Impression Works Better

An edentulous arch gives a scanner nothing rigid to stitch to, so the arch can drift slightly from one side to the other. A 2023 systematic review of intraoral scanners on edentulous arches found scans matched conventional impressions on firm tissue with attached mucosa, while the peripheral borders, the posterior seal area and the soft palate showed the largest discrepancies. Those are exactly the areas that give a complete denture its seal.

Where the ridge is firm and the borders are well defined, a digital case works well. Where the tissue is mobile, we’ll suggest a border-molded impression and the hybrid workflow. A milled base reproduces the design faithfully, but it can’t add border detail the scan never captured.

Any scanner that exports an open file works, including 3Shape TRIOS, Medit, iTero, CEREC/Primescan, Shining 3D and Planmeca, sent through 3Shape Communicate, Medit Link or most other platforms. For complete-mouth cases, send PLY so gingival color and soft-tissue detail come through.

05 · Partials

Partial Dentures Built to Your Approved Design

Framework Design and Fabrication

Nothing is cast, milled or printed until you’ve seen the design: the clasp at each abutment, such as an I-bar or a circumferential clasp, the rest positions, the connector dimensions and the extent of the retention mesh. Send your own design with the survey, or send the survey information and we’ll propose one for you to approve.

We make frameworks all three ways. A systematic review and meta-analysis of CAD/CAM framework accuracy found digitally produced frameworks fit slightly less closely than lost-wax castings, though within the clinically acceptable range, with printed patterns that are then cast coming closest. If you prefer one method, say so on the prescription. Where framework meets acrylic, retention is mechanical, through mesh, beads or grooves on a sandblasted surface; primers help, but we never rely on them alone.

When Flexible Partials Make Sense

Flexible partials work well for one or several missing teeth, for metal allergies and where hidden retention matters. They’re the wrong choice for heavy occlusal forces, wide base coverage or very deep undercuts, where the material can deform. Relines and repairs are possible but more involved than on acrylic, and a 2024 literature review of flexible dentures reports lower color stability and surface hardness than PMMA.

06 · Bases & teeth

Bases and Teeth Chosen for the Case

Heat-Cured

The traditional, economical choice. A stepped water-bath cure and slow cooling before the flask is opened keep porosity and distortion in check.

Injection-Molded

Resin injected under pressure shrinks and distorts less, adapts closely to the tissue and reduces tooth movement during processing. Our choice when fit has to be as precise as possible.

Milled

Cut from a pre-polymerized blank, so every copy is identical and the file can be milled again at any time.

Self-cure and 3D-printed resin bases are also available. Base resins include Lucitone 199 from Dentsply Sirona, a high-impact acrylic and standard heat-cured PMMA; denture teeth come from VITA, Ivoclar and Shofu, in acrylic, composite or porcelain. Prescribe a brand and that’s what we use. We never substitute a material without your consent.

07 · Quality control

How Our Denture Lab Checks Each Case Before It Ships

Every case passes three checks: records and materials on arrival, in-process checks between stages, and a final inspection by QC staff who sign off the release. For dentures, the in-process checks fall at the model, the wax pattern, the tooth setup and the processed denture, and a defect at any of them sends the case back a step.

Remounted and Balanced

After processing, the denture is remounted from your original jaw relation record. We adjust for even posterior contact on both sides, clear protrusive and lateral interferences for a balanced occlusion, and recheck midline, occlusal plane and seating.

Bases Measured and Backlit

Calipers catch thin spots; a strong light shone through the base reveals internal bubbles and cracks. A base with internal bubbles is remade, not patched, and polishing never touches the tissue surface beyond removing flash.

Frameworks Under Magnification

Clasp form and flex, rest adaptation, connector cross-section and a smooth path of insertion are checked on the cast. Porosity and cracks are checked under the microscope and, where needed, by X-ray or dye penetrant.

Guards and Retainers Tested on the Model

Thickness is measured at several points against your prescription, edges are checked for smoothness and extension, and retention is tested by seating and removing the appliance on the stone model. The fitting surface gets only the lightest finishing, so it seats in the mouth the way it seated on the model.

95% of cases pass final inspection the first time; the rest are remade before they ship. Our remake rate, the share of cases clients send back, runs at 2–3% across all our restorations.

08 · Warranty

Warranty and Remakes

Every removable denture we make carries a 1-year warranty. If the cause is on our side, we adjust or remake the denture free and move it to the front of the production queue. That covers a denture that doesn’t seat, a lifted border, a badly placed clasp, esthetics or an occlusion that’s off, and a gingival shade you’re unhappy with. Report it within 24 hours of receiving the case, with photos, and we’ll agree the cause with you before remaking anything.

Not covered: a change of shade or material after production, cases made from a poor impression at your request, and implant components or attachments. Full terms: Remake and Warranty Policy.

09 · About Istar Digital

Working With Our Denture Laboratory

Made In-House, Open to Inspection

Since 2012, Istar Digital has made every stage of its cases in four labs of its own in Shenzhen and Huizhou, with no work passed to another lab. Each lab has its own technician team, and if you prefer one team’s work, your cases can go to it. Tour the removable department in person or by live video.

Registered and Verifiable

Istar Digital is an FDA-registered establishment, Registration Number 3039441248, and our device listing covers complete and partial dentures; look it up in the FDA establishment registration and device listing database. Our labs run an ISO 13485 quality management system, we’re registered with the UK MHRA, and EU cases follow the MDR custom-made device procedure.

Start With One Case

The quickest way to judge a denture lab is with its work in your hands. A case that needs few trips, such as a duplicate or a scanned complete denture, shows you our setup, base and finish quickly. Single trial cases are welcome; an ongoing partnership works best with a regular flow of cases.

One Team, From Quote to Delivery

Quotes are itemized: the number of units sets the base, the material sets the unit price, and attachments, components and design complexity add to it. A named manager and case team look after your account in English by email, WhatsApp or video, from 9:30 am to 6:00 pm China time (UTC+8) and until midnight for urgent cases. Dental labs can have finished work shipped to any clinic address, though the sender address on the waybill can’t be changed.

10 · FAQ

Frequently Asked Questions

Can a new denture keep what the patient liked about the old one?

Yes. Your prescription sets the mold, shade and occlusal scheme, and photos guide the smile line and midline. The old denture tells us the lip support and tooth size the patient is used to, and any errors to correct. If these disagree, we ask you before setting the teeth.

Yes. Each dentist’s preferences are recorded separately and applied to their cases automatically, which suits group practices and DSOs.

Report it anyway. Responsibility for a remake usually stays with us, and we’ll look at the cause together before deciding.

Our case team takes only what production needs from your work order. Every case gets its own ID, the production floor works by case number rather than patient name, and only the case team, all under confidentiality agreements, can open case records.

Send Your First Case to Our Denture Lab

Tell us the case type, how you’ll take the records (scan, impression or models), your country, your scanner and your approximate monthly case volume. Your sales manager will reply with the price list and a stage plan for that first case, so the records arrive complete and the first trip is the right one.