Custom Night Guards Made to Your Rx, for Dental Clinics and Labs
Istar Digital Dental Lab makes custom night guards for dental clinics, DSOs, and dental labs: soft, hard, and hard-soft guards, each thermoformed on a model of the patient’s arch and built to the design on your prescription. You decide the guard. Our job is to make it exactly as written, check it against your records, and stand behind it when something isn’t right.
Custom Night Guard and Custom Bite Guard Options
“Night guard,” “bite guard,” and “occlusal guard” all describe the same protective appliance on a lab Rx. What changes the work at the bench is the construction you choose:
A dual-laminate guard codes as hard because, under the ADA’s guidance on occlusal guards with hard and soft components, the material that contacts the occlusal surface decides the category. Coding and benefits remain your office’s call.
A custom bite guard for contact sports is a different appliance with different design goals; we make those as custom sports mouth guards. Our full appliance range is on the custom dental guard page.
What a Custom Bruxism Mouth Guard Does, and What to Prescribe Instead
A custom bruxism mouth guard protects enamel and restorations from grinding and clenching forces. It isn’t a treatment for bruxism itself: the Cochrane review of occlusal splints for sleep bruxism found insufficient evidence that splints reduce the grinding, while noting a possible benefit for tooth wear. It’s worth telling patients at delivery that the guard protects their teeth rather than stops the habit.
A night guard also isn’t the right appliance when:
A therapeutic or repositioning splint has its own design and coding.
That needs its own assessment, and an advancement device is a different appliance; see our custom sleep apnea mouth guard.
A guard worn at night doesn’t change what happens while the patient is awake.
That’s a job for a retainer.
Writing the Rx for a Custom Night Guard
We don’t fill gaps in a prescription with a house default. These are the items that change how a guard is made:
If the records don’t match the Rx, the bite looks wrong, clearance is too tight for the thickness, undercuts are deep enough to affect seating, or the scheme you want needs a design decision, we contact you before forming.
Custom Night Guard Thickness: Write the Number You Mean
Three different measurements get called a guard’s thickness: the gauge of the sheet before forming, the finished thickness at a given point on the guard, and the opening the guard creates between the arches. They aren’t interchangeable.
A sheet thins as it’s drawn over the model, most over cusp tips, incisal edges, and convex surfaces, so a guard formed from a 2 mm sheet isn’t 2 mm everywhere. The opening depends on where the contacts end up as much as on the material.
No validated rule maps bruxism severity to a millimeter value, which is why thickness stays your decision. Say which measurement your number refers to, and if you need a minimum over the posterior contacts, write it as a finished value. We measure every finished guard with calipers at several points and compare the readings with your Rx.
Records That Get a Guard Right the First Time
Scans are checked within one working day of upload. If one shows noise, holes, or a missing area, we tell you right away so a rescan can be scheduled with the patient. Impressions are checked on arrival for distortion, bubbles, an incomplete arch, and an incorrect bite. Export settings are on our digital dental laboratory page, and packing steps are in our guide to sending cases.
How We Make and Check Each Custom Night Guard
Models and articulation. Digital cases are formed on 3D-printed models, which in our experience reproduce the scan more accurately than milled models. Our printers are checked against standard test pieces at regular intervals. The scan and the bite record are checked against each other, then the models go on an articulator to confirm the jaw relationship and contacts before forming.
Forming and finishing. The sheet is heated evenly, adapted under stable pressure, and cooled under pressure at a steady rate before release, so the guard holds the shape it took on the model. The tissue side gets light touch-up at most, because heavy grinding inside a guard is a common reason it won’t seat.
Final inspection. Along with the thickness readings, every guard is checked on the model before it’s packed:
A guard that fails a check is remade automatically. The patient ID follows the work order, the models, and the guard from intake on, and each finished guard is washed under high pressure, disinfected, and sealed in its own labeled bag.
Across all our product lines, 95% of cases pass final inspection the first time, measured in our lab before shipping. The figure closer to your experience is our remake rate, the share of cases clients send back: 2–3% lab-wide.
At Delivery and at Recall
A slightly high contact is a chairside adjustment. A guard that doesn’t seat, rocks, or cracks shouldn’t be reworked in the mouth; send it back under the warranty. If a guard you’ve adjusted still needs a remake, the responsibility usually stays with us.
Long-term wear deserves a look at recall visits. A report in the British Dental Journal describes unintended changes to the occlusion following the provision of night guards, and how often that happens isn’t well established. Asking patients to bring the guard to checkups lets you see wear, cracks, and contact changes early. Thermoplastic guards also distort with heat, so patients should keep them out of hot water, dishwashers, and hot cars.
Warranty and Remakes
Custom night guards carry a one-year warranty.
- Remade free: problems that start in our lab, such as a guard that doesn’t seat, lifted borders, a bite that doesn’t match the records, cracks, or a material defect. A guard that fit and later broke can usually be remade from the original records. For fit or bite problems we ask for a new scan or impression, because the same records can produce the same result.
- Charged: a remake because the requirements changed after production, because we flagged a poor impression or scan before starting and you asked us to go ahead, or because of damage after delivery.
- Shipping damage: send an unboxing video showing the waybill, the damaged guard, and the original packaging within 24 hours, and we remake it free.
- How to claim: report the problem within 24 hours of receiving the case, with the patient name, case number, a description, and photos. We confirm the cause with you before remaking, and remakes go to the front of the production queue.
Turnaround, Rush Cases, and Pricing
Custom night guards take 5–7 working days in the lab, counted from the day we receive complete records. Waiting for missing records or answers, weekends, Chinese public holidays, shipping, and customs aren’t counted. Digital cases skip the inbound shipment, so they reach you sooner overall. We notify you when production is finished and again, with tracking, when the case ships.
Rush service is free on every case type for clients who send 10 or more cases a month. We guarantee the rush ship date; arrival depends on the courier and customs.
Our prices aren’t published, and quotes are itemized to what you order. You pay to send impressions or a guard for remake to us; we pay to ship finished guards back, remakes included. Request our current price list for guard fees.
Why Clinics and Labs Send Their Custom Night Guards to Istar Digital
Istar Digital Dental Lab has made dental restorations and appliances since 2012 in four labs of our own in Shenzhen and Huizhou, China, with about 460 staff. No step of your case is outsourced, from the records check to packing. The four labs use nearly the same materials, but each has its own technician and service teams, so we can compare their results on your cases and assign your work to the team you prefer.
Istar Digital Dental Lab is an FDA-registered establishment, Registration Number 3039441248, which you can look up in the FDA establishment registration database. Our labs work under an ISO 13485 quality management system. If you’d like to see the guard line before sending a case, book a factory visit or a video tour, or read more about Istar Digital.
Custom Night Guard FAQs
Can I request rush after the case has already arrived?
Yes. You can ask for rush before you send the case or after we’ve received it, as long as your account qualifies.
Will you substitute a sheet if the one I named is unavailable?
Not without your consent. We ask first, and a written or verbal OK both count.
Can you ship finished guards directly to my client's practice?
Yes. Labs can have guards delivered to any address they give us. The sender address on the waybill can’t be changed.
We order for several offices. Can you report on quality?
Yes. DSOs and labs can get monthly reports on on-time delivery, remakes, and complaints.
When is your team available?
Customer service runs 9:30 a.m. to 6:00 p.m. China time (UTC+8), and we stay available until midnight for urgent cases.
Send Your First Custom Night Guard Case
The quickest way to judge a lab is a guard for one of your own patients. Single trial cases are welcome, and ongoing partnerships suit practices and labs with a regular flow of cases.
- Start a case: upload your scans or ship your impressions with a completed Rx form, with your guard specifications in its notes.
- Have a case you’re unsure about? Ask our team before you send it, with the scans or photos you have.