FDA Reg. 3039441248 · EU MDR · UK MHRA · ISO 13485
9:30–18:00 China time (UTC+8)
Sports guard
Guards & Retainers

Custom Sports Mouth Guard: Built and Measured to Your Rx

A custom sports mouth guard from Istar Digital Dental Lab is a lab-made athletic guard built to your Rx and checked before it ships. We make them for dental clinics, DSOs, and dental labs that want an athletic guard they can prescribe with confidence and deliver without rework.

01 · Protection

Why a Custom Athletic Mouthguard Protects Better

The American College of Prosthodontists recommends custom-made mouthguards for contact sports and rates them above stock and boil-and-bite guards for fit, retention, and protection. A custom athletic mouthguard is formed on a model of the patient’s own arch, so it stays seated without clenching and the athlete can breathe and talk with it in. A boil-and-bite guard is shaped by however hard the athlete happens to bite; a lab guard’s coverage and thickness are decided before forming.

What to Tell Athletes and Parents

A well-fitted guard reduces the risk of broken teeth and lip and cheek injuries. Concussion is a different matter. The ADA’s review of the evidence describes the link between mouthguards and fewer concussions as mixed and less consistent than for dental injuries. Present the guard as dental and orofacial protection, not as concussion prevention.

A sports guard also isn’t a night guard. If the patient grinds or clenches at night, prescribe a separate appliance from our night guard dental lab range.

02 · Thickness

Sheet Thickness vs Finished Thickness

“4 mm” on an Rx can mean two very different guards. Thermoplastic sheet is sold by its thickness before forming, and forming stretches it over the teeth. It thins the most over incisal edges, cusp tips, and the labial surfaces of prominent incisors, which are exactly the areas that take the first impact. Published measurements of custom guards have found losses of 25–50% from sheet to finished guard. A 4 mm sheet can leave well under 4 mm at the incisal edge.

That’s why we work from the finished thickness, not the sheet label. If the material you specified can’t reach your target, we contact you before forming instead of shipping a thinner guard.

What the Professional Bodies Recommend

SourceThickness guidance
Academy for Sports DentistryA minimum of 3 mm in the occlusal and labial areas
American College of Prosthodontists (2015)4 mm as the standard for most contact sports; 5–6 mm for extreme sports

Neither body sets a thickness for a specific sport. The choice is yours, based on the athlete’s exposure, anatomy, and tolerance. A thicker guard protects more at the point of impact but is harder to wear, and a guard that stays in the locker room protects nothing.

03 · Rx

Writing the Rx for a Custom Sports Mouth Guard

A complete Rx lets us build the guard you have in mind on the first pass:

Rx itemWhat to writeWhy it matters at the bench
ArchMaxillary, or mandibular for a Class III patientThe guard usually goes on the more protrusive arch, the one that takes the impact
Posterior coverageTo the distal of the second molars, or the first molars for a strong gag reflexSets where the guard ends; shortening it trades some protection for tolerance
Flange extensionLabial flange to within about 2 mm of the sulcus; palatal flange about 2 mm above the gingival margin (ACP guidance), or your own valuesToo short loses protection and retention; too long hits the frena and won’t be worn
Finished thicknessThe target value, and the area where it applies: labial, incisal, or occlusalTells us where material has to be kept during forming
OcclusionContacts against the opposing arch, and the bite record’s openingAn even bite on the guard keeps the jaw stable on impact
ReliefThe areas to block out, such as brackets, erupting teeth, tori, or restorations, and how muchBlocked-out areas keep the guard from locking into undercuts or pressing on what you want protected
MaterialA sheet brand if you have oneWe’ll use the brand you name

If the Rx and the records don’t match, for example the Rx names an arch the records don’t show, we contact you before starting.

04 · Contact sports

Custom Football Mouth Guard Cases and Other Collision Sports

Mouth protectors are required in high school football under NFHS rules, and starting in 2026 NFHS rules also bar any attachment that doesn’t serve to protect the teeth or mouth. Leagues and states vary, so check the athlete’s own rulebook before ordering add-ons.

For a custom football mouth guard, the helmet and face mask change what the guard is asked to do. The face mask shields the front of the face, and linemen and skill players breathe hard and call plays through the guard. So in football, breathing and speech carry more weight in the thickness trade-off than in most sports.

In sports without face protection, such as rugby, basketball, and combat sports, the teeth and lips take impacts directly, and the protection side of that trade-off weighs more.

05 · Braces

Athletes in Braces or With Changing Dentition

Braces

ADA patient guidance notes a guard on the lower arch may be appropriate when the lower teeth are in braces, and that retainers and other removable appliances shouldn’t be worn during contact sports. Send records taken with the brackets and wires in place. Teeth move during treatment, so expect to replace the guard as the arch changes.

Mixed dentition

The ACP suggests relieving erupting teeth by 1–2 mm so one guard lasts longer through the transition.

06 · Fabrication

How We Make Each Custom Sports Mouth Guard

Records Check

Digital scans are checked within one working day of upload. If a scan has noise, holes, or missing areas, we tell you right away, so a rescan doesn’t push back the athlete’s season. Impressions are checked on arrival for distortion, bubbles, and incomplete areas.

Printed Models on an Articulator

Digital cases are formed on 3D-printed models, which in our experience reproduce the scan more accurately than milled models. Our printers are checked against standard test pieces at regular intervals. Before forming, the scan and bite record are checked against each other, and the models are mounted on an articulator to set the occlusion on the guard.

Forming

The sheet is heated evenly, adapted to the model under stable pressure, and cooled at a steady rate while still under pressure before release. Controlled cooling helps the guard hold the shape it took on the model.

Final Inspection

Every guard is checked on the model before packing:

CheckWhat we look for
ThicknessCaliper readings at multiple points, compared with the finished thickness on your Rx
BordersSmooth, no burrs or lifted edges, extension as prescribed
Adaptation and retentionClose fit to the model; seating and removal to judge grip
MaterialNo cracks, bubbles, or tears

The tissue side gets only light touch-up, because heavy grinding there costs retention. A guard that fails any check is remade automatically. Each finished guard is cleaned with high-pressure washing, disinfected, and packed individually under the patient ID it has carried since intake.

Across all our product lines, 95% of cases pass final inspection the first time, measured in our lab before shipping. Our remake rate, the share of cases clients send back, runs at 2–3% across the lab.

07 · Submission

Sending a Sports Guard Case

Digital caseImpression case
ArchesFull-arch scan of the guard arch, including the labial and buccal vestibule, plus the opposing archFull-arch VPS or polyether impressions of both arches, with the vestibule captured. Alginate isn’t suitable for international shipping: it shrinks and distorts in transit
BiteDigital bite scanVPS bite registration, not wax, which softens in transit
Formats and systemsSTL, PLY, OBJ, DCM, or 3Shape .3oxz from 3Shape TRIOS, Medit, iTero, CEREC, Shining3D, Planmeca, and other open systems—
How to send3Shape Communicate, Medit Link, email, or WeTransfer; one zipped folder per case with one case ID across files and RxPack and ship with your Rx, then send us the tracking number. We can provide a shipping waybill

Disinfect impressions before they leave your office, and note the disinfectant and contact time. Many countries, the US included, hold back packages with undisinfected impressions. At our end, incoming cases are opened in a dedicated receiving area and disinfected according to material type before they enter production.

For export settings and file sizes, see our digital dental laboratory page; for packing impressions, follow our how-to-send guide.

08 · Turnaround

Turnaround, Rush Cases, and Pricing

Custom sports mouth guards take 5–7 working days in the lab, counted from the day we receive a complete case. Chinese weekends and public holidays aren’t production days. International shipping and customs are additional, which is why digital cases, with no inbound leg, reach you sooner. We notify you when production is complete and again at shipping, with the tracking number.

Before a season starts, rush service matters. It’s free for all case types for clients who send 10 or more cases a month. On a rush case we guarantee the ship date; the arrival date depends on the courier and customs.

Quotes are itemized to what you order rather than bundled into one price. You pay to send impressions, or a guard returned for remake, to us; we pay to ship finished guards back, remakes included. Request our current price list for sports guard fees.

09 · Delivery

At Delivery: Adjust Chairside or Send It Back

Small adjustments at try-in, such as easing a border that presses on a frenum or smoothing a contact, are chairside work. Contact us instead if the guard won’t seat, the borders lift, or the bite doesn’t match the records. Report any problem within 24 hours of receiving the case, with the patient name, case number, a description, and photos. We confirm the cause with you before remaking:

  • Fit or bite problems: we’ll usually ask for a new scan or impression, because a remake from the same records can repeat the problem.
  • Damage in transit: send the unboxing video with the waybill visible, the damaged guard, and the original packaging.

Custom sports mouth guards carry a one-year warranty. Lab-caused problems and documented transit damage are remade free of charge, and remakes go to the front of the production queue. A remake is charged when the requirements change after production, or when we flagged a poor impression or scan before starting and you asked us to proceed anyway.

10 · Why Istar

Why Clinics and Labs Send Us Their Sports Guards

Istar Digital Dental Lab has made dental restorations and appliances since 2012. We run four labs of our own in Shenzhen and Huizhou, China, with about 460 staff, and nothing is outsourced: your case stays in our labs from records check to packing. Every case carries a unique number that ties it to the technician, equipment, and inspection results, so any question about a guard can be traced.

Istar Digital Dental Lab is an FDA-registered establishment, Registration Number 3039441248, which you can look up in the FDA establishment registration database. Our labs operate under an ISO 13485 quality management system. You’re welcome to see the guard line on a factory visit or a video tour; learn more about Istar Digital.

FAQ

Custom Sports Mouth Guard FAQs

Will you change the sheet if the one I named isn't available?

Not without your consent. We tell you first and wait for your OK, written or verbal, before changing any material.

Yes. For any case we can provide the material’s brand, origin, and batch number, along with the supplier’s certificate of conformity.

Yes. Packaging, labels, and paperwork can carry no Istar Digital branding, and we ship to any address you give us. The sender address on the courier waybill can’t be changed. We never contact your dentists directly.

Customer service works 9:30 a.m. to 6:00 p.m. China time (UTC+8) and stays available until midnight for urgent cases.

Send Your First Sports Guard Case

The quickest way to judge our guards is on one of your own athletes. Single trial cases are welcome, and ongoing partnerships work best with a regular flow of cases.

  • Start a case: upload your scans or ship your impressions with a completed Rx form.
  • Fitting a whole roster, or ordering for several prescribers? Talk to our team about setting up your account.