3D Dental Lab: We Print What Printing Does Best
Get everything 3D printing can do for your cases, without buying a printer, managing resin or guessing which parts should be printed at all. Istar Dental Lab is a 3D dental lab with four labs of our own in Shenzhen and Huizhou, where we print surgical guides, wax-ups, models, provisionals, denture bases and even cobalt-chrome frameworks.
Your final zirconia is still milled and your E.max veneers are still pressed, so every part is made the way it performs best. You send the scan or impression, and we take care of the rest: printing, finishing, QC and the paperwork.
What Our 3D Printing Dental Lab Makes
Six kinds of work come off our printers, and each one goes through the same QC as the rest of your case.
Printed Models
When your case arrives as a scan, we print the working model in-house and finish the restoration on it. Printed models reproduce your scan more accurately than milled ones, so that’s what we use. For implant crowns, a printed model lets you check the emergence profile before we mill the final. Best for: scan cases that need a physical model for contacts, occlusion and finishing. → Digital Dental Labs
Diagnostic Wax-Ups and Mock-Ups
A printed digital wax-up lets you and your patient see the planned result before anything is milled, pressed or cast. The wax-up stage takes 2–3 working days. Best for: anterior esthetics, smile design and changes to the occlusion. → Veneers
Surgical Guides
Implant surgical guides, 3D printed in our own labs, so the same lab can take the case from guide to final restoration. The guide stage takes 2–3 working days. Best for: guided implant placement.
Provisional Crowns and Bridges
Provisionals printed in resin when the case suits it, or made in PMMA. Printed resin is gentle on opposing natural teeth. A provisional try-in stage takes 2–4 working days. Best for: staged treatment, testing a new form or occlusion, and protecting preps. → Provisionals
Printed Denture Bases
Printed resin bases are one option, alongside heat-cured, injection-processed and milled bases. The tissue decides which one fits the case, and every complete denture comes to you as a try-in before the final base is processed. Best for: complete and partial dentures from a scan, an impression or both. → Denture Lab
CoCr Partial Denture Frameworks
Cobalt-chrome frameworks built by selective laser melting, and also cast or milled. Nothing is printed until you’ve approved the design. Best for: labs and practices that want metal frameworks without running a metal printer. → Jump to: Laser-Printed CoCr Frameworks
Printed, Milled or Pressed: The Process Follows the Product
Being a 3D printing dental lab doesn’t mean printing everything. Printing is fast, wastes little material and handles complex shapes well, but some restorations need a different process. A 2025 scoping review comparing 3D printing and CAD/CAM milling in prosthodontics found printing more efficient with material and better with complex geometries. It also found that build orientation and post-processing strongly affect accuracy, and concluded that milling is still preferred for high-precision fixed prostheses. That’s how we split the work:
Models, wax-ups, surgical guides, provisionals, denture bases and CoCr frameworks: parts with complex shapes, parts made for a staged plan, and parts you check before the final.
Zirconia crowns and bridges. We mill them from pre-sintered zirconia and sinter them on locked programs, checking shrinkage compensation with standard test blocks. → Zirconia Dental Lab
E.max veneers, pressed from IPS e.max Press lithium disilicate.
PFM metal copings, made by casting or milling to suit the case. → Crown and Bridge Dental Lab
Night guards, occlusal splints and Essix retainers, formed over your model and checked against your bite on an articulator. → Night Guards and Splints
You choose the material on the Rx, and that’s what we use. If we think another material would suit the case better, we’ll ask. Nothing gets substituted without your OK.
How Our 3D Printing Dental Laboratory Keeps Parts True
A printed part is only as good as the printer, the resin and the records behind it. Here’s what we control so you don’t have to.
1. Printers Prove Themselves on Test Pieces, Not Your Case
If a printer drifts, we catch it on a test piece before it prints anything for you.
- We print standard test pieces at regular intervals and check their dimensions.
- Printers, mills and furnaces are calibrated every two weeks to a month, and every check is logged.
- A machine that fails a check stops until it’s repaired and verified again.
- New resins, software updates and new printers run trial batches before they go anywhere near a client case.
Your part: If a printed part doesn’t seat as you expect, send a photo to your case channel, and we’ll trace the machine and the batch.
2. Medical Resins Stay Tracked, in Date and Apart
The resin in your guide or provisional is the right one, in date and from a known batch.
- Resins are stored away from light at a stable temperature, stirred before printing and filtered regularly.
- We log each resin’s batch number and opening date, and discard anything past its shelf life.
- Biocompatible resins are stored and processed separately from non-medical resins, and printing has its own area apart from milling, porcelain and acrylic work.
- On request, we’ll send the brand, origin, batch number and certificate for every material in your case.
Your part: Ask for material documents on the Rx whenever your records need them.
3. Every Printed Part Can Be Traced
If you ever need to know how a part was made, we can tell you.
- Each case gets a unique ID linked to its technicians, equipment, material batches and QC results.
- Printed parts go through the same QC checks as the rest of the case, with final release by our 25-person QC team.
- Every shipment carries a packing list with the order number and case details.
Your part: Quote the order or case number whenever you contact us about a case.
Laser-Printed CoCr Frameworks
Metal printing takes its own equipment, its own heat treatment and its own checks. Our 3D printing dental laboratory does all of it in-house, so a framework never leaves our lab between design and delivery. In lab studies, laser-printed CoCr frameworks have shown a closer marginal fit than milled ones, according to the same 2025 scoping review.
Send your own framework design with the survey, or send the survey line analysis, undercut measurements and bite, and we’ll propose a design for you to approve.
Selective laser melting is one of three routes, alongside casting and milling. Tell us on the Rx if you prefer one.
Every printed framework gets a stress-relief heat treatment before we cut off the supports by wire cutting or machining and finish the surface.
We look for porosity, cracks and distortion by eye, under a microscope, by X-ray or with dye penetrant, and check the clasps, rests and connectors seated on the model.
Our metal printers are qualified for installation, operation and performance (IQ, OQ, PQ). That covers the laser, powder layering, atmosphere and slicing software, with test coupons measured for size, porosity and mechanical properties, and we requalify at set intervals.
We can certify the batch and composition of the alloy in your framework.
Already Printing In-House? Send Us the Rest
Printers in dental offices are still the exception. In a 2023 ADA Clinical Evaluators Panel survey of 277 dentists, 17% used a 3D printer, mostly for diagnostic models, splints and surgical guides. Among those without one, the most common reasons were that a dental lab makes the devices and that the investment is too high.
Whether you print or not, our 3D dental lab fits around how you work:
We accept 3D-printed models, as well as stone models and VPS, condensation silicone and polyether impressions.
Design only, milling and sintering only, or full production. You can send editable exocad and 3Shape design files, and we’ll work on your material and implant libraries.
Send us the metal frameworks, plus the layering, staining, glazing and denture setup that turn a printed or milled part into a finished case.
When we print for you, the post-processing and the resin waste stay with us. Used wash solvent and resin-contaminated liquid are sealed, labeled and collected by a licensed hazardous-waste handler, and leftover liquid resin is fully cured before disposal.
For dental labs: we can pack and label with your brand, never Istar’s, and ship straight to your client’s clinic. The sender address on the waybill can’t be changed, though. We never contact your dentists, and we’re happy to sign an NDA.
Working With Our 3D Dental Lab
In the lab: 2–3 working days for routine crowns and bridges and 5–7 for complex implant and full-arch cases, with each printed stage’s time on its card above. We count from the day a complete case arrives. Time spent waiting for your approval or for missing information doesn’t count, and transit comes on top.
Free for every material and case type if you send 10 or more cases a month. You can ask for it before or after the case arrives. We guarantee a rush case’s ship date, but arrival depends on transit and customs.
You cover shipping when you send an impression or model to us, and we cover shipping on every finished case and remake we send back. A scan skips the inbound leg entirely, and we can combine cases into one shipment.
Itemized to what you ask for, not one bundled price. Pricing starts from the number of units and the material, and design complexity or implant parts are added on top. Your sales manager sends the current price list. → Contact / Price List
You get a named manager and a support team, by email, WhatsApp or video call. During working hours, 9:30 a.m. to 6:00 p.m. China time (UTC+8), you’ll usually hear back within an hour, and we extend support until midnight for urgent cases. Outside those hours, the reply comes within 12 hours.
Istar is an FDA-registered establishment, registration number 3039441248, which you can look up in FDA’s establishment registration database. Our labs run a quality management system under ISO 13485, and EU cases follow the MDR procedure for custom-made devices. Crowns, bridges, ceramic veneers and implant restorations carry a 3-year warranty, and denture bases 1 year. → Remake and Warranty Policy
Want to see the printers before you send a case? Book a factory visit or a video tour. → Book a factory visit
Questions About Printed and Digital Work
How do I send my first case?
Email us the scan files or upload them through your scanner’s platform or WeTransfer. For an impression, we can send you a waybill, or you can ship it with your own courier and send us the tracking number. Single trial cases are welcome, and many new clients start that way. Ongoing partnerships suit practices and labs with a regular flow of cases.
Which cases need my approval before production?
Complete dentures, partial dentures with complex frameworks, full-arch implant cases, implant bridges, custom abutments, bridges of four units or more, anterior veneers and multiple anterior ceramics, full-mouth occlusal rehabilitation, telescopic and attachment cases, and cases with tight space or an occlusal interference. You can ask to see any other design too. Waiting for approval doesn’t count toward lab time.
Can you work to my own design parameters and libraries?
Yes. Send us the links and files for your material and implant libraries along with your design parameters. Where your library differs from ours, yours wins. For a group practice or a lab, we save each dentist’s preferences for contacts, occlusion, margins and esthetics and apply them to every later case, until you confirm a change in writing.
Can you match documents and materials to my country's rules?
Yes. We confirm the delivery country before we accept a case and follow its rules for materials, labels and certificates. If something conflicts, we raise it with you first. Custom-made device statements, material certificates and product labels are available in English.
Can the same technicians work on all my cases?
Yes. Larger clients can have a dedicated technician team, and you can name specific technicians, designers or QC staff. Our four labs use almost the same materials but have separate technician and service teams, so you can compare their work and keep your cases with the team you prefer.
Start With One Printed Case
Order a wax-up, a guide or a framework from our 3D dental lab, and judge the fit, the finish and the paperwork for yourself. To get it right the first time, include:
- Scans: prep arch, opposing arch and bite as separate files (STL, or PLY for anterior esthetic, implant bridge and full-arch cases), one ZIP per case. Or send a VPS impression.
- Rx: product, material, shade, tooth numbers and any design preferences.
- For frameworks: your design, or the survey line analysis, undercut measurements and bite we need to propose one.