FDA Reg. 3039441248 · EU MDR · UK MHRA · ISO 13485
9:30–18:00 China time (UTC+8)
Custom mouth guard lab

Custom Mouth Guards for Dental Clinics and Labs

Istar Digital Dental Lab makes every custom mouth guard on one guard production line for dental clinics, DSOs, and dental labs: sports guards, night guards, and sleep appliances, each formed on a model of your patient’s arch and built to your Rx.

Custom sports guard, night guard and sleep appliance on models
5–7 working days
Lab time for sports, night and sleep guards
1-year warranty
On every guard type
Caliper-checked
Thickness measured at multiple points against your Rx
Return shipping on us
For finished guards and remakes
01 · Guards

Custom Mouth Guards We Make

Guard
What it's for
What your Rx decides
Details
Sports mouth guard
Absorbing and spreading impact in contact and collision sports
Arch, posterior coverage, flange extension, finished thickness
Night guard: soft, hard, or hard-soft
Protecting teeth and restorations from grinding and clenching
Construction, arch, thickness, jaw position, occlusal scheme
Sleep appliance (mandibular advancement device)
Patients you're treating for snoring or obstructive sleep apnea
Appliance design and advancement, per your Rx

Retainers are a separate product; see our dental lab for retainers.

Matching the Custom Dental Guard to the Job

A custom dental guard can be any of three appliances with opposite design goals, so the type on the Rx matters more than the name. None of them stands in for another: an athlete who also grinds needs both a sports guard and a night guard, and a sleep appliance is built for neither impact nor grinding.

02 · Custom-made vs custom fit

Custom-Made vs Custom Fit Mouth Guard

On a retail shelf, “custom fit” usually means a self-fit guard: the ADA describes boil-and-bite guards as designed to be fitted by the user at home. The label tells you nothing about how the guard was shaped. A lab-made custom fit mouth guard starts from records you took, and the Academy for Sports Dentistry asks for exactly that: a guard fabricated on a model of the patient’s teeth, made from an impression, that fits accurately, stays in position during impact, and has at least 3 mm of thickness in the occlusal and labial areas.

The difference is control. With a self-fit guard, coverage and thickness depend on how hard the athlete bites into soft plastic. With a lab guard, you set both on the Rx before forming begins.

What You Can Tell Patients About Protection

The ADA recommends a properly fitted mouthguard to reduce the incidence and severity of oral injury, and cites a 2019 review in which mouthguard users were 82% to 93% less likely to suffer dentofacial injuries. Evidence on concussion is mixed and less consistent, so present a sports guard as dental and orofacial protection, not as concussion prevention.

03 · Records

Sending a Custom Mouth Guard Case From Overseas

A guard is only as good as the arch it’s formed on, and records that travel internationally need more care than records driven across town.

Digital case
Physical case
What to capture
Full arch of the guard arch, including the labial and buccal vestibule; the opposing arch; a bite scan
Full-arch VPS or polyether impressions of both arches with the vestibule captured, or poured stone or printed models
Bite record
Digital bite scan
VPS bite registration. Wax softens and distorts in transit, which lowers the bite on the finished guard
Material to avoid
—
Alginate. It loses water and shrinks on an international trip and can grow mold, which also raises customs quarantine issues. Pour it first and send the model, or switch to VPS
Formats and systems
STL, PLY, OBJ, or 3Shape DCM and .3oxz, from 3Shape TRIOS, Medit, iTero, CEREC, Shining3D Aoralscan, Planmeca, and other open systems. iTero and CEREC cases need an STL or PLY export, not the native file
—
How it reaches us
3Shape Communicate, Medit Link, email, or WeTransfer: one zipped folder per case, one case ID on every file and the Rx
By courier to our Shenzhen lab, using your account or a waybill we provide. Send us the tracking number when it ships

A scan missing the opposing arch or the bite has to be retaken, because we can’t set the occlusion on the guard without it.

Disinfect impressions before they leave your office and record the disinfectant and contact time. The US is among the countries that hold back packages containing undisinfected impressions. Digital cases skip the inbound courier leg and its customs clearance, so the finished guard reaches your patient sooner. For export settings and packing, see our digital dental laboratory page and how-to-send guide.

04 · Make & check

How Our Guard Line Makes and Checks Each Case

Before Forming

Scans are checked within one working day of upload for holes, noise, and bite errors; impressions are checked on arrival for distortion, bubbles, an incorrect bite, and incomplete areas. If a case doesn’t match its Rx or the records are too poor to build on, we contact you before starting work. The scan and bite record are matched, and the models are mounted on an articulator to check the occlusion the guard will be set to. Digital cases are formed on 3D-printed models, and our printers are checked against standard test pieces at regular intervals.

Forming to a Finished Thickness

Thermoplastic sheet is sold by its thickness before forming, and forming stretches it, so a finished guard always ends up thinner than the sheet it came from. The thinning is worst over incisal edges and cusp tips. When you write a thickness, tell us whether you mean sheet or finished thickness and where it applies. Each sheet is heated evenly, adapted under stable pressure, and cooled at a steady rate while still under pressure, so the guard keeps the shape it took on the model.

Final Inspection

Check
How
Thickness
Caliper readings at multiple points, compared with your Rx
Borders
Smooth, with no burrs or lifted edges, and extended as prescribed
Adaptation and retention
Close fit on the model; seating and removal to judge grip
Material
No cracks or bubbles

The tissue side gets only light touch-up, because heavy grinding there costs retention. A guard that fails any check is remade before it leaves us. Every case carries one patient ID from intake to packing, and each finished guard is washed under high pressure and packed individually under that ID.

05 · Turnaround & warranty

Turnaround, Warranty, and Remakes

Sports guard
Night guard
Sleep appliance
Lab time
5–7 working days
5–7 working days
5–7 working days
Warranty
1 year
1 year
1 year

Lab time runs from the day we receive a complete case. Time spent waiting for missing records or your reply doesn’t count, and Chinese weekends and public holidays aren’t production days. We notify you when production is complete and again at shipping, with the tracking number.

Rush service is free for every guard type for clients who send 10 or more cases a month. On a rush case we guarantee the ship date; the arrival date depends on the courier and customs.

Report any problem within 24 hours of delivery:

  • Free remake: the guard won’t seat, the borders lift, or the bite is inaccurate. For these we’ll usually ask for a new scan or impression, since a remake from the same records can repeat the problem. Remakes go to the front of the queue.
  • Charged remake: the requirements change after production, or we flagged poor records before starting and you asked us to proceed.
  • Transit damage: send an unboxing video with the waybill visible, the damaged guard, and the original packaging. With that evidence the remake is free.

You pay to send impressions, models, or a returned guard to us; we pay to ship finished guards back, remakes included. We don’t publish guard prices, and quotes are itemized to what you order rather than bundled into one price.

06 · About Istar Digital

Why Clinics and Labs Send Us Their Guard Cases

Istar Digital Dental Lab has made dental restorations and appliances since 2012. We run four labs of our own in Shenzhen and Huizhou, China, with about 460 staff, and we don’t outsource any step, so your guard is made, inspected, and packed by our own people. Across all our product lines, 95% of cases pass final inspection in our lab, and our remake rate, the share of cases clients send back, runs at 2–3%.

Istar Digital Dental Lab is an FDA-registered establishment, Registration Number 3039441248, which you can verify in the FDA establishment registration database. Our labs work under an ISO 13485 quality management system.

During China working hours (UTC+8) our team answers technical questions within about an hour, and support runs until midnight for urgent cases.

07 · FAQ

Custom Mouth Guard FAQs

Which arch should a sports guard go on?

The Academy for Sports Dentistry recommends the leading arch, the more protrusive one, because it takes the greatest force. For most athletes that’s the maxillary arch; in a Class III bite it’s usually the mandibular.

Yes. Name the brand on the Rx and we’ll form with it. If it isn’t available, we’ll ask before using anything else, and we only change a material with your consent, written or verbal.

Yes. For any case we can provide the material’s brand, origin, batch number, and the supplier’s certificate on request.

Yes. Packaging, labels, and paperwork can carry no Istar Digital branding, and we ship to any address you give us. The sender address on the courier waybill can’t be changed. We never contact your dentists directly.

Send Your First Custom Mouth Guard Case

The fastest way to judge our guards is on one of your own patients. Single trial cases are welcome, and ongoing partnerships work best with a regular flow of cases.

  • Start a case: upload your scans or ship your records with a completed Rx form.
  • Request the price list or book a factory or video visit: contact our team.