Custom Sleep Apnea Mouth Guard: Made to Your Construction Bite
A custom sleep apnea mouth guard from Istar Digital Dental Lab is a mandibular advancement appliance made to your Rx and to the construction bite you record for the patient. We make them for dental clinics, DSOs, and dental labs that want the jaw position they chose reproduced in the finished appliance.
What a Custom Mouth Guard for Sleep Apnea Is, and What It Isn't
Patients call it a mouth guard. Clinically it’s an oral appliance, most often a mandibular advancement device (MAD), which holds the lower jaw forward during sleep to help keep the upper airway open. Three appliances get mixed up at the front desk, and they aren’t interchangeable:
| Appliance | What it’s for | Jaw position |
|---|---|---|
| Custom mandibular advancement device | Snoring and obstructive sleep apnea, after diagnosis | Mandible held forward at the position the dentist sets |
| Night guard (occlusal guard) | Protecting teeth from grinding and clenching | No advancement |
| Boil-and-bite snoring device | Retail product the user shapes at home | Wherever the user happened to bite |
The AADSM’s definition of an effective oral appliance (2019 update) shows where the line falls. An effective appliance is made from impressions or models of the patient’s own mouth and engages both arches. It stays retained at the prescribed setting, and it advances in increments of 1 mm or less over a range of at least 5 mm. The advancement is reversible and the setting can be verified. A prefabricated device that is trimmed, bent, or relined doesn’t meet the definition.
For bruxism patients, see our night guard dental lab range.
Who Decides What
The diagnosis comes from the patient’s medical provider. The dentist examines the dentition, chooses the appliance, records the bite, and sets and titrates the protrusion. Istar Digital Dental Lab fabricates what the Rx describes. We don’t choose the treatment position or the appliance design for your patient.
Custom Mouth Guard for Snoring: Same Records, Different Diagnosis
Many patients come in asking for a custom mouth guard for snoring. The AADSM’s 2025 practice standards point out that screening alone can’t tell primary snoring from obstructive sleep apnea, so a snoring patient shouldn’t be treated until a medical provider has made a diagnosis. Once OSA has been ruled out, an oral appliance can be a first-line option for snoring.
For the lab, a snoring case needs the same things as an OSA case: a complete Rx, records of both arches, and a construction bite.
What Your Rx Should Specify
We build the design your Rx describes, so the more precisely it’s written, the less we have to ask. A complete Rx covers:
| Rx item | What to write | Why it matters at the bench |
|---|---|---|
| Appliance design | One-piece or two-piece, how the arches connect, and how the appliance advances | Determines which components we build and how the two arches relate |
| Starting protrusion | Millimeters forward of centric occlusion, or a percentage of the patient’s maximum protrusion | Lets us confirm the bite record matches the position you intended |
| Vertical opening | The interincisal opening captured in the bite record | Sets the space between the arches that the appliance is built around |
| Titration | The advancement range you plan to use | The mechanism has to reach the final position you expect to titrate to |
| Coverage and relief | Teeth to cover, plus areas to relieve, such as crowns, tori, or recession | Tells us where the appliance has to grip and where it has to stay clear |
| Material and thickness | The material, hardness, and thickness you want | These are your clinical choices; we build to them |
| Dental conditions | Crowns, bridges, implants, missing teeth, and any metal sensitivity | Restorations and the number of remaining teeth limit design and material; metal-sensitive patients need nonmetallic components |
If the Rx and the records don’t agree, for example the protrusion on the Rx differs from the bite record, or a tooth named on the Rx is missing from the scan, we contact you before production starts.
Working with a design you haven’t sent us before? Send its specification ahead of your first case, and we’ll go through it with you before you book the patient.
The Construction Bite Decides the Case
A custom mouth guard for sleep apnea can only be as accurate as the bite it’s built on. The AADSM standards call for impressions or scans and the construction bite to be taken in person by a licensed dental professional. For the starting position, they note that published work places the comfortable and effective range at roughly 25–75% of maximum protrusion.
How to send a bite we can build on:
- Physical bite. Record the treatment position with a protrusive bite gauge and a VPS bite registration material. Avoid wax: it softens with heat in transit and compresses under load. A bite that settles even slightly changes both the protrusion and the opening we build to. Pack the bite in its own sealed, labeled bag with the case.
- Digital bite. Take the bite scan with the patient held at the treatment position, not in centric occlusion. If the digital bite doesn’t hold steady, add a silicone bite record and intraoral photos of the patient in that position.
- Label the values. Write the protrusion and opening on the Rx, so we can check the record against them once the models are mounted.
Sending a Case
| Digital case | Impression case | |
|---|---|---|
| Arches | Full-arch scans of both arches | Full-arch VPS or polyether impressions of both arches. Alginate isn’t suitable for international shipping: it shrinks and distorts in transit |
| Formats and systems | STL, PLY, OBJ, DCM, or 3Shape .3oxz from 3Shape TRIOS, Medit, iTero, CEREC, Shining3D, Planmeca, and other open systems | — |
| How to send | 3Shape Communicate, Medit Link, email, or WeTransfer; one zipped folder per case, with one case ID across the files and Rx | Ship with your Rx and send us the tracking number. We can provide a shipping waybill |
Disinfect impressions and bite records before they leave your office, and note the disinfectant and contact time. Many countries, the US included, hold back packages containing undisinfected impressions. At our end, incoming cases are opened in a dedicated receiving area and disinfected according to material type before they enter production.
For export settings and file sizes, see our digital dental laboratory page. For packing physical cases, follow our how-to-send guide.
How We Make and Check Each Custom Sleep Apnea Mouth Guard
Before Production
Digital scans are checked within one working day of upload. If a scan has noise, holes, missing areas, or a bite that doesn’t seat, we tell you right away. Impressions are checked on arrival for distortion, bubbles, incomplete areas, and an incorrect bite.
Digital cases are built on 3D-printed models, which in our experience reproduce the scan more accurately than milled models. Our printers are checked against standard test pieces at regular intervals. The scan and the bite record are then checked against each other, and the models are mounted on an articulator to verify the target jaw position before work begins.
Final Inspection
Every appliance is checked on the models before packing:
| Check | What we look for |
|---|---|
| Thickness | Caliper readings at multiple points, compared with your Rx |
| Borders | Smooth, no burrs or lifted edges, extension as prescribed |
| Adaptation and retention | Close fit to the models; seating and removal to judge grip |
| Material | No cracks or bubbles |
The tissue side gets only light touch-up, because heavy grinding there costs retention. An appliance that fails any check is remade automatically. Each finished case is cleaned with high-pressure washing, disinfected, and packed individually with the patient ID on the bag.
Across all our product lines, 95% of cases pass final inspection the first time, measured in our lab before shipping. Our remake rate, the share of cases clients send back, runs at 2–3% across the lab.
Delivery, Follow-Up, and Remakes
The AADSM standards recommend reassessing the patient within 30 days of insertion, every six months during the first year, and at least once a year after that. At those visits, watch for sore jaws or teeth, joint pain, loosening teeth, changes in the bite, and dislodged restorations, and check the appliance itself for wear and fractures once a year. Treatment efficacy is confirmed through the patient’s medical provider.
Small adjustments at delivery, such as easing a border or smoothing an edge, are chairside work. Contact us instead if the appliance won’t seat, the borders lift, or it doesn’t reproduce the bite record. Report any problem within 24 hours of receiving the case, with the patient name, case number, product, a description, and photos. We confirm the cause with you before remaking:
- Fit or bite problems: we’ll usually ask for a new scan or impression and a new bite, because a remake from the same records can repeat the problem.
- Damage in transit: send the unboxing video with the waybill visible, the damaged appliance, and the original packaging.
Custom sleep apnea mouth guards carry a one-year warranty. Those lab-caused problems are remade free of charge, as is documented transit damage, and remakes go to the front of the production queue. A remake is charged when the requirements change after production, or when we flagged poor records before starting and you asked us to proceed anyway.
Turnaround, Rush Cases, and Pricing
Custom sleep apnea mouth guards take 5–7 working days in the lab, counted from the day we receive a complete case. Time spent waiting for missing records or a reply to our questions isn’t counted. Chinese weekends and public holidays aren’t production days. International shipping and customs are additional, which is why digital cases, with no inbound leg, reach you sooner. We notify you when production is complete and again at shipping, with the tracking number.
Rush service is free for all case types for clients who send 10 or more cases a month. On a rush case we guarantee the ship date; the arrival date depends on the courier and customs.
Quotes are itemized to what you order rather than bundled into one price. You pay to send impressions, or an appliance returned for remake, to us; we pay to ship finished work back, remakes included.
Why Dentists and Labs Send Us Their Sleep Appliances
Istar Digital Dental Lab has made dental restorations and appliances since 2012. We run four labs of our own in Shenzhen and Huizhou, China, with about 460 staff, and nothing is outsourced: your case stays in our labs from records check to packing. Every case carries a unique number that ties it to the technician, equipment, and inspection results, so any question about an appliance can be traced.
Istar Digital Dental Lab is an FDA-registered establishment, Registration Number 3039441248, which you can look up in the FDA establishment registration database. Our labs operate under an ISO 13485 quality management system. DSOs and labs can send us their supplier qualification questionnaires, and you’re welcome to see the appliance line on a factory visit or a video tour. Learn more about Istar Digital.
Custom Sleep Apnea Mouth Guard FAQs
Will you change the material if the one I specified isn't available?
Not without your consent. We tell you first and wait for your OK, written or verbal, before changing any material.
Can I get the material brand and batch for an appliance?
Yes. For any case we can provide the material’s brand, origin, and batch number, along with the supplier’s certificate of conformity.
We're a dental lab. Can you ship appliances straight to our client's office under our name?
Yes. Packaging, labels, and paperwork can carry no Istar Digital branding, and we ship to any address you give us. The sender address on the courier waybill can’t be changed. We never contact your dentists directly.
When can I reach your team?
Customer service works 9:30 a.m. to 6:00 p.m. China time (UTC+8) and stays available until midnight for urgent cases.
Send Your First Sleep Appliance Case
The quickest way to judge our work is on one of your own patients. Single trial cases are welcome, and ongoing partnerships work best with a regular flow of cases.
- Start a case: upload your scans and bite scan, or ship your impressions and construction bite, with a completed Rx form.
- Need the price list, or ordering for several prescribers or your lab’s clients? Talk to our team and we’ll send fees and set up your account.