Orthodontic Laboratory: Appliances Made to Your Prescription, Checked on the Model
A retainer that rocks on the teeth, a guard thicker than you asked for, an aligner stage packed in the wrong bag: each one costs you an appointment and some of your patient’s patience. Istar Digital is the orthodontic laboratory inside a full-service dental lab, with four labs of our own in Shenzhen and Huizhou, China. We make clear aligners, retainers, expanders, functional appliances and occlusal splints to your prescription.
Before it ships, each appliance is checked against your prescription, tested for retention on the model and packed under its own patient number. We pay the shipping back to you, remakes included.
Orthodontic Appliances We Make
You decide the appliance, the arch and the design, and we build to it. Everything below is made, finished and inspected in our own labs, and nothing is sent out to another lab.
Clear Aligners
Aligner series staged from your records. Our technicians build the setup and send you the design files, and we start production once you approve them. Every stage is trimmed, polished and checked by hand for sharp edges, then sealed in its own bag marked with the patient and the step number. Best for: aligner cases you diagnose and supervise.
Palatal Expanders
Expansion appliances built on a model of the patient’s arch, to the design on your prescription. If something on the prescription can’t be built as written, we tell you before production starts. Best for: maxillary expansion cases.
Functional Appliances
Removable functional appliances made to your construction bite and prescription. Best for: growing patients you’re treating with a functional appliance.
Hawley, clear vacuum-formed and bonded lingual retainers, each made to the type and span you prescribe. Best for: the retention phase after aligners or fixed appliances. → Retainer types
Hard, soft and dual-laminate night guards, bite splints and periodontal splints, in the arch, hardness and thickness you prescribe. We check the jaw position against your scan and bite record, then again on the articulator. Best for: bruxism, clenching and post-orthodontic patients who grind. → Night Guards and Splints
Custom guards made on the patient’s own model. Best for: patients in contact sports.
3D-printed models from your scan, and custom trays as a separate item. Best for: study models, records and impression trays.
Our Orthodontic Retainer Lab: Hawley, Clear and Bonded
Retention is where a finished case is kept or lost, and there’s no single right retainer for every patient. A 2023 Cochrane review of retention procedures found the evidence too weak to favor any one approach over another. So the choice stays with you. As an orthodontic retainer lab, our job is to make the type you prescribe, and to make it fit and hold.
An acrylic base with a labial bow and clasps, which you can adjust chairside. The bow, the clasps and the base outline follow your prescription.
Thermoformed on a printed model of the patient’s arch, in the thickness you prescribe. Heating, pressure and cooling are controlled so the material forms evenly. Then the edges are trimmed and polished.
Bonded Lingual Retainers
A fixed lingual wire made on the model to the span you specify.
Need a replacement? If you judge the teeth haven’t moved, send us the original scan again with a new prescription. There’s no need for a new impression.
How Our Orthodontic Laboratory Gets the Fit Right
When a removable appliance seats on the model but feels loose in the mouth, the problem can start in four places in the lab: the model, the forming, the fitting surface or the final check. Each of those gets its own control here.
1. An Accurate Model to Build On
A formed appliance can only fit as well as the model under it.
- We check your scan within one working day and tell you right away if there’s noise, a hole or a wrong bite.
- Models are printed in-house from your scan.
- We print standard test pieces regularly and compare their dimensions to catch printer drift.
- Biocompatible resins are stored and processed apart from non-medical resins.
Your part: scan both arches and the bite. For expanders and functional appliances, capture the full palate.
Printer choice makes a measurable difference. A 2023 study in BMC Oral Health of models printed for aligner production found accuracy varied with printer technology. Every printer tested stayed within the 0.25 mm clinical limit, but the entry-level printer came close to it.
2. Controlled Forming
Heat, pressure and cooling kept under control.
- The sheet is heated evenly and formed under steady pressure.
- It cools under pressure at a steady rate and is released only once it has set.
- Thickness and hardness come from your prescription, never from a default.
Your part: if you prefer a specific material brand, name it on the prescription.
3. A Fitting Surface We Leave Alone
So it seats in the mouth the way it did on the model.
- The fitting surface gets only the lightest finishing, because heavy adjusting there can stop an appliance from seating properly.
- Edges are trimmed, polished and checked all the way around, by touch and by eye, for burrs and sharp spots.
Your part: mark any area you want relieved or extended on the prescription.
4. Measured and Seated Before It Ships
What arrives matches what you prescribed.
- Thickness is measured with calipers at several points and compared with your prescription.
- Edges are checked for smoothness and extension, with no burrs or lifted borders.
- Retention is tested by seating and removing the appliance on the stone model.
- Anything with a crack, a bubble or a fit problem isn’t shipped.
Your part: check fit and retention when the case arrives, and tell us within 24 hours if anything’s wrong.
One Patient, One Bag
Orthodontic cases rarely come one piece at a time: upper and lower, a retainer plus a guard, or a full aligner series. The patient number goes on the work order, the model and the appliance itself, all the way through production.
After a high-pressure clean, each case is packed on its own and labeled for its patient. Aligner stages are each sealed in a separate bag marked with the step, so each tray is easy to match to its step.
An Orthodontic Dental Laboratory Inside a Full-Service Lab
The same lab also makes your crowns, bridges, implant restorations and dentures, with about 460 people across four labs and no outsourcing. That means you can send restorative and orthodontic work to one orthodontic dental laboratory, under one account.
Lab Time and Case Updates
Routine cases take 2–3 working days in our lab and complex cases 5–7, and we tell you which applies when we check your files. Lab time counts from the day a complete case arrives. Time spent waiting for your approval or for missing records isn’t counted. Transit and customs come on top. You get an update at each key stage: received, design, production, inspection and shipping.
Rush Cases
If you send 10 or more cases a month, rush service is free for every appliance type, and you can ask for it before or after we receive the case. We guarantee the ship date; arrival depends on transit and customs.
What Ships, and Who Pays
A digital case travels to us as a file, so there’s nothing to ship. If you send impressions or models, disinfect them first; that shipping is on you. We pay to send every finished case back, remakes included, to any address you name.
Warranty and Remakes
Every orthodontic appliance carries a 1-year warranty. If something is wrong, send us the patient’s name, the case number, the product, the problem and photos within 24 hours of delivery. We agree on the cause with you before remaking anything, and remakes go to the front of the queue. → Remake and Warranty Policy
Itemized Quotes
We quote each item on your prescription separately, not as one bundled figure. Your sales manager sends the current price list on request.
Registered and Open to Visit
Istar Digital is an FDA-registered establishment, Registration Number 3039441248, which you can look up in the FDA establishment registration database. Our labs run an ISO 13485 quality management system, and custom-made devices for the EU follow the MDR custom-made device procedure. You’re welcome to visit our labs in Shenzhen and Huizhou, or tour them by video.
Orthodontic Production for Dental Labs
Short on capacity for appliances? Use our orthodontic laboratory as an extension of yours. Send us the full case, or just the part you need: design only, production of your own designs, or both. Work goes out under your name, and we never contact your dentists.
Frequently Asked Questions
Which scanners and file formats do you accept?
Any scanner that exports an open file: STL, PLY or OBJ, or DCM and .3oxz from 3Shape. Export iTero scans as STL or PLY from the iTero portal, and CEREC scans as STL or PLY, since we don’t accept their proprietary formats. You can send files through your scanner’s platform or a WeTransfer link. → Send a Case guide
How quickly do you answer technical questions?
During our working hours (China time, UTC+8), usually within an hour. Outside them, the time difference can stretch that to 7–8 hours, and never more than 12.
How do holidays affect our cases?
We don’t produce or ship on weekends or Chinese public holidays, and lab time pauses over them. You can still message us, but replies may be slower. Ahead of busy periods, we can send you cut-off dates for your cases.
Can we start with a single case?
Yes, and many new clients do. Single trial cases are welcome, and an ongoing partnership works best with a regular flow of cases.
Send a Case to Our Orthodontic Laboratory
What to Send
- Scans of both arches and the bite in an open format, with the full palate for expanders and functional appliances
- Or upper and lower impressions with a bite record, disinfected before shipping
- A prescription with the appliance, the arch, the design, the thickness and hardness, and the date you need it
- Clinic, dentist and patient details
- For functional appliances, the construction bite; for aligners, intraoral photos and your treatment goals
For Your Quote
Tell us which appliances you prescribe most, roughly how many cases you send a month, and whether you work from scans or impressions. Let us know which scanner you use, and whether you’d like to send restorative cases too. Your sales manager will reply with the price list.