Custom Post and Core
Istar Digital Dental Lab makes custom post and cores for dental clinics, DSOs and dental labs in the US and Europe. Choose a cast metal, SLM-printed metal or milled zirconia post and core, send a post-space scan or impression, and get back a one-piece restoration that seats in the canal you prepared and leaves the right room for your crown.
Every case is designed, made and inspected in our own four labs in Shenzhen and Huizhou, China. Nothing is outsourced.
Our Post and Core Options
Cast Post and Core
The classic route. We pour your impression, build a pattern of the post space and core on the working model, then invest, burn out and cast it in the alloy on your Rx. It’s the natural choice when your record is a physical impression, and an intact metal post can usually be retrieved if the tooth ever needs retreatment.
SLM-Printed Post and Core
The same metal post and core, built digitally. We design it in CAD, and our metal printers build it layer by layer by selective laser melting, with no wax or resin pattern in between. Our metal melting, printing and heat-treatment equipment goes through installation, operational and performance qualification, then periodic requalification, with test pieces checked for dimensions, porosity and mechanical properties.
Zirconia Post and Core
A tooth-colored option for teeth that will get an E.max or zirconia crown. We design it in CAD, mill it from a zirconia blank and sinter it to the blank manufacturer’s firing schedule. Zirconia is strong but very stiff and hard to bond, a fractured zirconia post is difficult to remove, and long-term clinical data are limited. Prescribe it where esthetics drive the choice and the remaining tooth structure is sound enough to share the load.
Pairing the Core With Your Crown
Put the final crown material on the Rx, because it decides how we finish the core:
Metal Core Under Zirconia
A metal core needs an opaque layer. Without it, the gray of the metal and of a dark stump can show through a monolithic full-contour zirconia crown.
Any Core Under a PFM Crown
The crown’s own opaque layer masks the core, so core and stump color don’t affect the shade of a PFM crown.
Clearance
The core is shaped like a crown preparation for the material you plan to use. If the opposing tooth leaves too little room, we tell you before production rather than thin the core.
Which Teeth Benefit From a Custom Post and Core
A post retains the core when too little coronal tooth remains to hold a buildup. It doesn’t strengthen the root; every millimeter of dentin removed to fit a post weakens it. Compared with a prefabricated fiber post and a direct core, a lab-made dental post and core is usually the better fit when:
No post material has proven better across the board. Clinical comparisons haven’t shown a consistent advantage for fiber over metal, and fiber posts tend to fail by debonding while stiffer posts put more of the risk on the root. When enough walls remain, a direct buildup is simpler, and for root-filled molars with intact walls, an onlay often preserves more tooth than a post, core and full crown.
Ferrule matters more than the post. Aim for 1.5-2 mm of sound vertical dentin, about 1 mm thick, ideally all the way around; core material doesn’t count toward it. Treat that as a biomechanical goal rather than a pass/fail line: a partial ferrule beats none, and when a tooth has a good ferrule, the choice of post has less influence on the outcome.
Inside Our Post and Core Workflow
Case Check
Our case coordination team confirms receipt and the number of cases, then checks the Rx, the post space and the bite. If a model or impression has defects, we send you photos and confirm whether we can proceed. Time spent waiting for missing information doesn’t count toward lab time.
Design
Our CAD design department, about 100 people, handles the digital design for SLM and zirconia cases. Cast cases get their pattern on the working model.
Production
Casting runs in our ceramic and metal department, about 70 technicians. Milling has its own department of about 70. Milling, 3D printing and porcelain work in separate production areas so materials don’t cross-contaminate.
Inspection
The technicians at each step check the case before it moves on, and a quality control department of about 25 runs the final inspection. 95% of cases pass final inspection at Istar Digital; that’s a separate figure from our overall remake rate of 2-3%, which counts cases clients send back.
Shipping
Finished work is packed in protective air-cushion wrap and couriered back to you.
Sending a Dental Post and Core Case
Intraoral Scans
We accept post-space scans from 3Shape TRIOS, iTero, Medit, Primescan, Shining 3D, DEXIS, Panda and other scanners, sent directly or by WeTransfer. The scan has to show the canal to its full prepared depth. Deep, narrow post spaces are where scanners most often fall short; if yours can’t reach the bottom of the canal, take an impression instead. File format details are on our digital dental laboratory page.
Impressions and Models
Use VPS (preferred) or polyether; alginate shrinks and distorts in international transit. The impression has to capture the whole canal, with no tears, bubbles or drags in the canal portion, so retake it before shipping if the post portion is short or torn. Poured stone models are welcome if they’re free of bubbles, chips and distortion, with a clear post space and margin.
The Rx
Wax bites soften in transit and throw off the clearance we leave for the crown, which is why item 6 asks for VPS. Download the Istar Digital Rx form and follow How to Send for packaging and courier details.
Why Clinics and Labs Choose Istar Digital
Verifiable Registration
Istar Digital is an FDA-registered establishment, Registration Number 3039441248; check it in the FDA establishment registration database. Our labs work under an ISO 13485 quality management system.
No Silent Substitutions
If a material ever has to change, we ask first, and nothing changes without your written or verbal approval.
Post, Core and Crown From One Team
The crown that goes over the core comes out of the same labs, so clearance and shade are planned together.
Built for DSOs and Labs
We save each doctor’s preferences and can split them by practice. All four labs use nearly the same materials, so you can compare our technician teams and route your cases to the one you prefer.
See It Yourself
Book a visit to our labs or a live video tour of the production floor.
Rush Cases, Remakes and Try-In
Rush Cases
Free for clients who send 10 or more cases a month. We guarantee the ship date; the arrival date depends on customs clearance.
Free Remakes
For lab-side problems such as a post and core that won’t seat or an open margin.
Not Covered
Material changes you request, and cases we made at your request from an impression we had already flagged as unclear.
At Try-In
The post and core should seat passively, all the way down, without binding or wedging, before you check the core margin and crown clearance. That’s the sequence in this cast post-and-core technique from Compendium. If it doesn’t seat, don’t grind the post to force it; send it back with a new scan or impression, because a fit problem can’t be solved from the old record.
Frequently Asked Questions
How is a post and core priced?
Quotes are itemized to your requirements, not one bundled price. The material sets the base price, and we confirm the full cost before production starts.
Which CDT code applies?
D2952 covers a post and core indirectly fabricated, in addition to a crown, which is a lab-made post and core. D2954 covers a prefabricated post and core. Coding and insurance documentation are the treating dentist’s decision.
Can my lab send its own design file?
Yes. We accept editable exocad and 3Shape designs and produce them as designed. If we see an obvious problem, we tell you before production and go ahead only once you confirm.
Can you ship unbranded for my lab's clients?
Yes. Packaging, labels and paperwork can go out without the Istar Digital name.
Send Your First Post and Core Case
A single trial case is welcome. Pick a tooth with a wide canal or little coronal structure left, record the full post depth, and send it with a completed Rx. Once you’re sending cases regularly, an ongoing account keeps international shipping cost-effective.