FDA Reg. 3039441248 · EU MDR · UK MHRA · ISO 13485
9:30–18:00 China time (UTC+8)
Night guard
Guards & Retainers

Hard Night Guard: Rigid Occlusal Guards Built to Your Rx

A hard night guard from Istar Digital Dental Lab is a custom, rigid guard formed on a model of your patient’s arch. We make them for dental clinics, DSOs, and dental labs that want a hard occlusal guard built to the design on the Rx, not to a house default. For an overview of every guard we make, see our night guard dental lab page.

01 · Construction

Hard Acrylic Night Guard or Rigid Thermoformed: What You're Ordering

“Hard acrylic night guard” is used loosely across the industry. Depending on the lab, it can mean heat-processed PMMA, a rigid thermoplastic sheet formed over the model, a printed splint resin, or a dual-laminate guard with a hard outer shell. All of them can be called hard, but they’re made differently.

Our hard guards are thermoformed from rigid sheet on your patient’s model. We also make dual-laminate guards, with a hard occlusal surface over a softer inner layer. If you work with a particular sheet brand, name it on the Rx and we’ll use it. If you want a different construction, such as processed acrylic, write that on the Rx too.

Both of our constructions code the same way. The material that contacts the occlusal surface decides the code, not how the guard was made. Under ADA guidance on guards with hard and soft components, any guard with a hard occlusal component is reported as a hard appliance: D9944 for full arch, D9946 for partial arch. Coding and benefits remain your office’s call. Our job is to make sure the guard you receive matches the construction you wrote.

02 · Design

Designing a Hard Occlusal Guard: What the Rx Decides

“Hard night guard” on an Rx tells us the material, not the design. Arch, thickness, and occlusal scheme are clinical decisions, and a complete Rx covers each of them:

Rx itemWhat to writeWhy it matters at the bench
PurposeProtective night guard, or another appliance designA repositioning or other therapeutic design is a different appliance from a protective guard, and depending on the payer it may fall under D7880 rather than a guard code
ArchMaxillary or mandibularSets which model the guard is formed on and which arch it occludes against
CoverageFull arch, or partial arch with the teeth coveredTells us where the guard starts and stops
Jaw positionMIP or CR, with a bite record taken in that positionA rigid surface has no give, so any bite error carries straight into the guard’s contacts
Contacts and guidanceEven contacts on the guard, plus canine guidance, anterior guidance, or an anterior rampThese schemes aren’t interchangeable and produce different occlusal surfaces
ThicknessThe value you want, and whether it’s the sheet or the finished guardSee how we measure it under Forming the Rigid Sheet
ReliefTori, recession, deep undercuts, or restorations you want kept off loadRelief has to be planned before forming

If the Rx and the records don’t agree, for example the Rx names an arch the records don’t show, or the Rx asks for a construction or design feature we can’t make as written, we contact you before we start rather than guessing.

Setting Patient Expectations

A hard guard protects tooth surfaces and restorations from grinding and clenching forces. As Delta Dental explains, it doesn’t necessarily stop the patient from grinding. Don’t present a hard guard as a TMD treatment either. A 2024 Cochrane review of occlusal interventions for TMD found the evidence on occlusal interventions, hard stabilization splints included, too uncertain to support firm conclusions.

03 · Fabrication

How We Make Each Hard Night Guard

Records Check

Digital scans are checked within one working day of upload. If a scan has noise, missing areas, or holes, we tell you right away so a rescan doesn’t push back your patient’s appointment. Physical impressions are checked on arrival for distortion, bubbles, and an incomplete arch.

Printed Models on an Articulator

Digital cases are formed on 3D-printed models, which in our experience reproduce the scan more accurately than milled models. Our printers are checked against standard test pieces at regular intervals, so dimensional drift is caught on a test print, not on a patient’s guard. Before forming, the scan and bite record are checked against each other, and the models are mounted on an articulator to verify the jaw relationship and occlusal contacts.

Forming the Rigid Sheet

The sheet is heated evenly, adapted to the model under stable pressure, and cooled at a steady rate while still under pressure before it’s released. Controlled cooling under pressure helps the guard hold the shape it took on the model.

As the sheet is drawn over the model, it thins, most over cusp tips, incisal edges, and convex surfaces. The finished guard is thinner than the sheet, and not evenly so. That’s why each finished guard is measured with calipers at multiple points and compared with the thickness on your Rx, sheet or finished, whichever you specified.

Finishing the Tissue Side

A rigid guard can’t flex over the teeth to seat, so the tissue-side surface gets only light touch-up, if any. Heavy grinding there is a common reason a guard won’t seat.

04 · Inspection

Final Inspection Before Your Hard Night Guard Ships

Along with the thickness readings, every guard is inspected on the model before packing:

CheckWhat we look for
BordersSmooth, no burrs or lifted edges, extension as prescribed
AdaptationClose fit to the model with no gaps
RetentionSeating and removal on the model to judge grip
MaterialNo cracks, bubbles, or inclusions

A guard that fails any check is remade automatically, not shipped with a note. The patient ID stays on the work order, model, and guard from intake onward, and each finished guard is cleaned with high-pressure washing, disinfected, and packed individually under that ID.

Across all our product lines, 95% of cases pass final inspection the first time; that’s measured in our lab before shipping. The figure that matters more to you is our remake rate, the share of cases clients send back, which runs at 2–3% across the lab.

05 · Delivery

At Delivery: Adjust Chairside or Send It Back

A slightly high contact is a chairside fix. The rigid occlusal surface takes selective grinding and polishing, and if a guard you’ve adjusted still needs a remake, responsibility usually stays with us.

Contact us instead if the guard won’t seat, the borders lift, the bite doesn’t match the records, or the guard cracks. Report it within 24 hours of receiving the case, with the patient name, case number, a description, and photos. We identify the cause with you before remaking:

  • Fit or bite problems: we’ll usually ask for a new scan or impression, because a remake from the same records can repeat the problem.
  • A guard that fit well but broke: we can remake from the original records.

Hard night guards carry a one-year warranty. Lab-caused problems are remade free of charge, and remakes go to the front of the production queue. A remake is charged when the requirements change after production, or when we flagged a poor impression or scan before starting and you asked us to proceed anyway.

06 · Submission

Sending a Hard Night Guard Case

Digital caseImpression case
ArchesFull-arch scans of the arch receiving the guard and the opposing archFull-arch VPS or polyether impressions of both arches. Alginate isn’t suitable for international shipping: it shrinks and distorts in transit
BiteDigital bite scan in the prescribed jaw positionVPS bite registration in the prescribed jaw position, not wax, which softens and distorts with heat in transit
Format and systemsSTL, PLY, OBJ, DCM, or 3Shape .3oxz from 3Shape TRIOS, Medit, iTero, CEREC, Shining3D, or Planmeca—
How to sendEmail, WeTransfer, 3Shape Communicate, or Medit Link; one zipped folder per case (not RAR), with one case ID across files and RxDisinfect, pack, and ship with your Rx, then send us the tracking number. We can provide a shipping waybill

For scan export settings and file-size limits, see our digital dental laboratory page; for packing impressions, follow our how-to-send guide.

07 · Turnaround

Turnaround, Rush Cases, and Pricing

Hard night guards take 5–7 working days in the lab, counted from the day we receive the case. International shipping and customs are additional, which is why digital cases, with no inbound leg, reach you sooner overall. We notify you when production is complete and again when the case ships, with the tracking number.

Rush service is free for all case types for clients who send 10 or more cases a month. On a rush case we guarantee the ship date; the arrival date depends on the courier and customs.

Quotes are itemized to what you order rather than bundled into one price. You pay to send impressions, or a guard returned for remake, to us; we pay to ship finished guards back to you, remakes included. Request our current price list for guard fees.

08 · Why Istar

Why Clinics and Labs Send Us Their Guards

Istar Digital Dental Lab has made dental restorations and appliances since 2012. We run four labs of our own in Shenzhen and Huizhou, China, with about 460 staff, and nothing is outsourced: every step of your case, from records check to packing, stays in our own labs.

Istar Digital Dental Lab is an FDA-registered establishment, Registration Number 3039441248, which you can look up in the FDA establishment registration database. Our labs operate under an ISO 13485 quality management system. You’re welcome to see the guard line for yourself on a factory visit or a video tour; learn more about Istar Digital.

FAQ

Hard Night Guard FAQs

Will you use a different sheet if the one I specified isn't available?

Not without your consent. We tell you first and wait for your OK, written or verbal, before changing any material.

Yes. Dental labs can have guards delivered to any address they give us, such as the prescribing office. The sender address on the waybill can’t be changed.

Yes. DSOs and labs can get monthly reports on on-time delivery, remakes, and complaints.

Customer service works 9:30 a.m. to 6:00 p.m. China time (UTC+8) and stays available until midnight for urgent cases.

Send Your First Hard Night Guard Case

The quickest way to judge our guards is on one of your own patients. Single trial cases are welcome, and ongoing partnerships work best with a regular flow of cases.

  • Start a case: upload your scans or ship your impressions with a completed Rx form.
  • Ordering guards in volume, or for several prescribers? Talk to our team about setting up your account.