FDA Reg. 3039441248 · EU MDR · UK MHRA · ISO 13485
9:30–18:00 China time (UTC+8)
Case study
Dentures
Complete

Cosmetic Dentures Case: Whiter, Bigger Teeth, Tested Side by Side

Cosmetic dentures usually start with a simple request: whiter teeth, bigger teeth. That’s what this patient wanted, and it’s what the Rx said. The catch was that her face had limits the Rx didn’t mention.

She’s 66 , and she’d worn the same upper and lower complete dentures for 12 years . She brought the dentist a printed photo of a bright, wide smile and said, “I want my teeth to look like that” . Our job was to make cosmetic dentures that looked like an upgrade, not like a denture.

Final design · complete upper and lower dentures
#3–#14
Upper · two setups tried
#19–#30
Lower complete denture
Two upper wax setups tried side by side
Ivoclar teeth, shade B1

Aesthetic Denture Case at a Glance

Prosthesis
Conventional complete upper and lower dentures, no implants, #3 to #14 and #19 to #30
What the patient asked for
Whiter teeth and bigger front teeth
What decided the design
Two upper wax setups, tried in the mouth one after the other
Teeth
Ivoclar denture teeth, shade B1
Base
Lucitone 199, heat-processed
Lab time
7 working days across both stages

Patient Situation

Her old set still fit well enough. She didn’t complain about chewing. What bothered her was the look :

Dull, yellowish teeth. After 12 years the front teeth read about A3.5 on the shade guide, with stain at the necks .
Small, worn front teeth. The upper centrals measured 8.0 mm wide and 9.5 mm long, with flat, chipped edges .
"Old lady teeth." Her words, passed on by the dentist .

So she wanted the opposite: bright and big. That’s a fair request. Worn, stained teeth do age a smile. The question was how far to go.

Her face gave us a few things to work with. Her upper lip is thin and fairly short. Her skin has a warm tone. When she smiles normally, the upper lip covers the denture gum, so the teeth do all the talking .

What the Dentist Asked For

The dentist took border-molded final impressions, made wax rims, and recorded the bite and a facebow . Then the Rx spelled out what should make these cosmetic dentures :

Rx itemWhat it said
Overall goal“Whiter and bigger front teeth. She wants a brighter smile.”
Tooth shadeBL2, the lightest bleach shade in the tooth line
Front tooth sizeUpper centrals about 9.5 mm wide
Midline, canine lines, lip lineAs marked on the upper rim
Vertical dimension and biteAs recorded on the rims, no change
Lip supportAs recorded on the rims
CharacterizationLeave it to the lab

The dentist also sent the patient’s reference photo, plus face photos at rest and smiling, taken with a 5500K flash .

The bite, the vertical dimension, and every chairside call stayed with the dentist. Picking the mould, setting the teeth, and showing what each choice would look like were ours.

The Technical Problem: Cosmetic Dentures That Don't Fit the Face

Two Rx items didn’t match the records. Neither was wrong. They just pulled against what the rims and the photos told us.

Problem 1: the bigger mould didn't fit between the canine lines

The dentist marked her canine lines on the upper rim. Measured around the curve of the rim, they sat 46 mm apart . That’s the room her face gives the six upper front teeth.

The mould with 9.5 mm centrals measured 52 mm across those six teeth . That’s 6 mm too wide. There are only a few ways to fit that:

Push the canines back. Each canine ends up about 3 mm behind its line, close to where a premolar should sit. The corners of the smile fill with teeth.
Bring the front teeth forward. The arch gets longer, so the teeth stick out past the lip support the dentist recorded.
Overlap the laterals. The teeth fit, but the bigger size gets hidden, which defeats the purpose.

The Foundation for Oral-facial Rehabilitation’s notes on esthetics and characterization tie the length of the front teeth to the wax rim. A 2021 review of esthetics in complete dentures ties their size to the size of the face: larger teeth for a large face, smaller teeth for a small one. Her rims and her face both pointed to cosmetic dentures with centrals smaller than 9.5 mm .

Problem 2: BL2 next to a warm, 66-year-old face

Bleach shades are made to match bleached natural teeth. In cosmetic dentures, there’s nothing natural next to them to blend with. The only reference is the face.

We put a BL2 tab on her face photo, calibrated with the shade guide in the frame . Next to her warm skin, it read as stark white . The same 2021 review notes that lighter shades are mostly used for younger patients and slightly darker ones for older patients. That’s a guideline, not a rule. Some older patients really want bright teeth, and that’s their call.

Why we didn't just pick for her

We could’ve written back and said, “We suggest B1 and a smaller mould.” But she’d brought a photo. A note from the lab wasn’t going to change her mind, and it shouldn’t. With cosmetic dentures, the patient has to like what they see. She had to see both versions in her own mouth.

Our Plan: Two Wax Setups, One Try-In

So for this cosmetic denture case, we proposed two upper wax setups on separate trial bases, to try in at the same visit . The lower got one setup, built to work with both uppers .

The esthetics and characterization notes describe a similar idea: putting sample teeth in different moulds and shades under the lip to help choose. Two full setups take it one step further. She sees the whole smile, not just one tooth.

Setup A: as the Rx askedSetup B: our suggestion
Upper centrals9.5 mm wide9.0 mm wide
Six front teeth, total width52 mm48 mm
CaninesAbout 3 mm behind each canine lineAbout 1 mm behind each line
ShadeBL2B1
EdgesSmooth and evenSmooth, with very light rounding at the corners

Setup B is still bigger and much whiter than her old teeth. The centrals are 1.0 mm wider than before, and B1 is far lighter than the stained A3.5 she’d been wearing . We weren’t trying to talk her out of the upgrade. We were trying to find the version of it her face could carry.

How We Made These Cosmetic Dentures

Records check

The final impressions, rims, bite, and facebow came in by courier . We checked the rims for the marks we needed: midline, canine lines, and the lip line at rest and smiling. All were there .

On cosmetic dentures, the face photos matter as much as the bite. These had the shade guide in the frame, taken with a 5500K flash, not window light. That matters. Camera, flash, and white balance all shift color, so we only trust a photo when the tab is in the same shot.

Setting both uppers

Our removable team mounted the casts with the facebow and set both uppers to the same rim :

Same midline, same incisal edge position, same vertical dimension. Only the mould and the shade changed between A and B. That way she was comparing size and color, nothing else.
Same back teeth. The premolars and molars were identical in both setups. So the bite the dentist checked would hold for whichever upper she picked.
One lower. The lower front teeth were set to work with both upper widths .

The try-in: she picked in the mirror

The dentist tried Setup A first, then Setup B, and sent us photos and a short video of her talking with each .

Check at try-inSetup ASetup B
Vertical dimension and centric relationConfirmedConfirmed
Lip at restSame as the rimsSame as the rims
Corners of the smileFilled with front teethNatural dark space at the corners
“F” and “V”ClearClear
“S”ClearClear
Patient’s reaction“Too much. That looks like dentures.”“That’s what I wanted.”

She chose Setup B on her own, after looking in the mirror and at the photos . The dentist signed off on it.

She asked for one change. In Setup B we’d rounded the corners of the centrals very slightly. She wanted them squarer, like the smile in her photo . We squared the corners in the wax without changing the width, length, or position of any tooth, and sent new photos. The dentist approved by email, with no second chair visit .

What could still change after approval

Approval locks in the big decisions. Here’s how it works in our lab:

After the wax try-in is approvedFree?
Shade, surface finish, slight shape changes, contactsYes, we can still adjust these
A different tooth size or positionPossible, but it’s not a free remake

On this case, that meant the mould and the setup were final once the dentist approved Setup B. Nothing about the size would change after that.

Processing: keeping what she approved

Finished cosmetic dentures have to match the wax the patient picked. Even a small drift shows right in the smile. The risk is the teeth moving or the base warping while the acrylic is processed.

Processing: a stepped water bath rather than a fast boil, then slow cooling in the water before opening the flask. That cuts down on shrinkage and on teeth drifting out of the approved setup.
Remount: back on the articulator with the original records, to restore the vertical dimension and centric relation. Then we adjusted the contacts on both sides.
Polishing: the tissue surface and the borders are shielded. Only the outer surfaces get polished.
Checks: calipers for base thickness, magnification and backlight for bubbles. Internal or multiple bubbles mean a redo.

Before release, we checked the B1 teeth against the shade guide under our standard light . Our QC team inspected the case at the model, wax, setup, and final stages.

Finished Cosmetic Dentures: Design Goals and Results

We checked the finished cosmetic dentures against the same records and photos the plan started from .

Design goalHow it was checkedResult
Bigger front teethCalipers on the finished centrals9.0 mm wide, 10.0 mm long
Front teeth inside the canine linesMeasured on the mounted cast48 mm across the six, canines about 1 mm behind each line
Whiter shadeShade guide under standard lightB1
Squarer central cornersFront-view photoSquared, as approved
Lip supportSide profile, compared with the rimsSame as the rims
Speech“F”, “V” and “S” words at deliveryClear
BiteArticulating paper at deliveryLight adjustment on #14 only

Dentist and patient feedback

Dentist

“Having both setups at the same visit saved us an argument. She picked B herself, so there was no second-guessing at delivery” .

Patient

She said her teeth look “new, not fake.” The bigger centrals felt a little odd to her lip for the first few days .

Where this result has limits

B1 was the shade she picked for her cosmetic dentures, and it’s the one she’ll keep. Denture teeth don’t get whiter later the way natural teeth can be bleached.

The fit will change as the ridges keep changing. Cleveland Clinic puts relines at about every one to two years, or whenever the fit changes. The dentist set up recalls with her .

This cosmetic denture case came down to her canine lines, her lip, and her own pick in the mirror. Another patient asking for “whiter and bigger” might end up at BL2, or at the Rx’s full size. That depends on the face and on what they choose when they see it.

What to Send Us for Cosmetic Dentures

When cosmetic dentures are mostly about how the teeth look, the records that show the face count as much as the impressions. Along with your usual complete denture records, send:

Rim markings: midline, canine lines, and the lip line at rest and smiling. Canine lines tell us how much room the front teeth really have.
Face photos: at rest and smiling, straight on, with a 5500K flash and the shade guide in the frame. Phone photos with filters aren't reliable for shade.
The patient's reference photo, if they bring one. It tells us what they're hoping for, even if their face needs a different version of it.
The old dentures or their photos, with a note on what the patient likes and dislikes about them.
Your call on options: if you'd like two setups to compare, say so on the Rx .
Rx: our Rx form covers the basics. Our how-to-send guide covers packing, and our digital workflow takes scans.

Complete dentures generally take 5–7 working days in our lab. Clinic visits and shipping between stages come on top of that.

Who Made It

This cosmetic denture case ran through our removable denture department of about 55 people, with support from a CAD design team of about 100 and a separate QC team of about 25. Those teams work inside Istar Digital Dental Lab’s four labs in Shenzhen and Huizhou, China. We started in 2012, we’ve got about 460 staff, and we don’t outsource. Removable work runs about 4,000 to 6,500 cases a month, depending on the season.

We’re an FDA-registered establishment (Registration Number 3039441248), which you can check in the FDA establishment registration database. Our labs run an ISO 13485 quality management system, and custom-made dentures for EU clinics follow the MDR custom-made device procedure.

FAQ on Cosmetic Dentures

What tooth and base options do you offer for cosmetic dentures?

Teeth can be composite, acrylic, or porcelain, from VITA, Ivoclar, or Shofu. Bases can be standard heat-processed PMMA, high-impact acrylic, Lucitone 199, injection-molded acrylic, 3D printed resin, or milled. We also make metal dentures with cobalt-chromium bases or titanium palatal plates.

Only with your OK. We tell you first, and we need your consent, written or verbal, before any material changes.

If the denture doesn’t look right in the mouth, or the base color is off, we redo it free. Changing the tooth shade or material after delivery isn’t free.

Yes, conventional, digital, or a mix. When the soft tissue is tricky, we suggest a hybrid route with an injection-molded or heat-processed final base, because milling isn’t as good at reproducing fine border detail.

Then it’s a partial. See our partial dentures.

We’ll make it to the Rx, no sign-off form needed. Problems caused by that design, remakes included, aren’t on us.

Acrylic denture work carries a 1-year warranty. You pay to send a case in, and we pay to ship finished work back, remakes included. Rush service is free for clients sending 10 or more cases a month. We guarantee the ship date, but not the arrival date, because customs times vary.

We don’t publish prices on the website, but you can ask for our price list. Quotes are itemized to what you ask for, not one bundled number.

Send Us Your Next Cosmetic Denture Case

Got a patient who wants whiter, bigger teeth and a dentist who wants them to still look right? Send it to us as your own cosmetic denture case. Single trial cases are welcome, and regular case flow suits an ongoing partnership. You can also browse our complete dentures, or book a factory visit or video tour.