Patient Situation
Here’s what we had to go on for these B1 zirconia crowns, all from the dentist’s scans, photos and notes:
A dark stump or metal core can show through full zirconia. These stumps weren’t dark enough to need masking, which we checked from the stump photos before design. For darker ones, our translucent zirconia crowns case shows how we handle masking.
What the Dentist Asked For
The Rx, condensed :
Full-contour multilayer zirconia on all four was the dentist’s call. The bite was easy, and they wanted one material across the front.
The Technical Problem: B1 Sits Eight Steps Away From A3
VITA’s classical guide has 16 shades. The letter is the hue group and the number is chroma. A dentalcare.com course on the guide describes A as reddish-brown and B as reddish-yellow, and it lays the 16 tabs out lightest to darkest:
| Tab | Place in the light-to-dark order | Where it showed up in this case |
|---|---|---|
| B1 | 1st | The patient’s target |
| A1 | 2nd | One of the options we sent |
| A2 | 5th | Where the lateral necks ended up heading |
| A3 | 9th | The canines, premolars and lower incisors |
So B1 next to A3 isn’t one shade apart. It’s eight places apart in lightness, plus a change of hue and more chroma. Put B1 zirconia crowns right against A3 canines and you get a hard line, not a smile.
Some step is normal, though. Natural canines usually read darker and more saturated than the centrals. We weren’t trying to erase the difference. We wanted a step, not a cliff.
Why a B1 shade zirconia crown needs more than a tab
B1 on an Rx is a target, not a recipe. Zirconia crown shade matching starts with the tab, but the same B1 can come out differently depending on the build, where the crown sits in a layered disc, the stain, and whether it’s glazed or polished. Each of those had to be set with the canines in mind.
The Shade Options We Sent
Before design, we sent the dentist three shade plans for the B1 zirconia crowns, with ours marked :
| Option | What it looks like | Why it did or didn’t fit |
|---|---|---|
| All four straight B1 | Exactly what the Rx said | The brightest result, but the biggest jump at #7/#6 and #10/#11 |
| Centrals B1; laterals B1 body with a warmer neck, toward A2 | Brightest in the middle, stepping down toward the canines | Chosen. Keeps B1 where people look first and softens the step |
| All four A1 | Closer in hue to the A3 canines | A1 sits right beside B1 in lightness, so it wouldn’t read much brighter, and the patient asked for B1 |
We also noted that bleaching the canines first would shrink the gap. That’s a clinical call, and the patient turned it down because of sensitivity . So the rest of the zirconia crown shade matching had to happen inside the four crowns.
The dentist talked the options through with the patient and picked the second one. Their reply on the case thread became the working shade plan .
How We Met Each Requirement on These B1 Zirconia Crowns
Reading the records
We got intraoral scans in STL and PLY, a bite scan and the Rx . On front teeth we open the PLY first. Its color shows gum levels and the canines’ surface texture, which an STL leaves out. That’s part of our normal digital workflow.
The shade photos were taken before the prep, with the teeth wet, under a 5500K flash, and with the tabs held in the same plane as the teeth . One shot was taken after the prep, when the teeth had dried out and looked lighter, so we left it out .
CAD design
Our design team set the four crowns up as one group so the midline, lengths and edges line up. We sent a preview and held milling. The dentist asked for the #8 and #9 edges 0.3 mm longer, then approved the design in writing .
What the approved design locked in :
Milling, sintering and color
All four B1 zirconia crowns came out of one multilayer B1 disc, set so the higher-chroma layer sits at the neck . Kuraray’s KATANA FAQ says moving the crown inside the disc changes the gradation you get. The same FAQ sets 0.8 mm as the minimum anterior wall for its UTML and STML discs. Other discs have their own numbers, so we follow the maker’s numbers for whichever disc the case uses.
One disc and one sintering run kept the four crowns even with each other . The program is locked, and shrinkage comes from the zirconia maker’s numbers, checked with test pieces on each batch.
After sintering, the technician stained the laterals’ cervical third toward A2 and left the centrals at B1 . Then came texture: soft vertical lobes and fine lines copied from the canines, cut by hand. A smooth, shiny surface reflects more light and reads whiter, which is the last thing a B1 shade zirconia crown needs next to A3.
We kept the stain on the light side on purpose. Stain can add color, but it can’t take it away, so stopping a little light keeps every try-in change doable .
The pre-glaze try-in
The B1 zirconia crowns shipped on working day 5, stained but unglazed . The patient wore provisionals in the meantime .
The dentist tried them in with water, took full-smile photos with the same flash settings as the pre-op set, and had the patient look in a hand mirror . Here’s what came back :
| Checked at try-in | What they found | What we did |
|---|---|---|
| Seat, margins, contacts | Fine | No change |
| Lengths and midline | Fine | No change |
| Lateral necks | Still a touch bright next to the canines at full smile; the patient wanted the laterals to “stop standing out” | More cervical stain on #7 and #10 |
| Central surfaces | Smoother than the canines; they looked glassy in photos | More texture before glaze |
Without this round, those bright lateral necks would’ve shown up after glazing, when they’re much harder to change.
Glaze and polish
The crowns came back to us for a second stage of 2 working days, which made 7 working days at the lab in all, plus one day waiting on design approval . The finish :
Finishing moves color, and a B1 shade zirconia crown has very little room to move. A study of monolithic zirconia found that polishing and glazing both lowered lightness, and glazing also pushed it toward yellow. Kuraray’s FAQ adds that some of its multilayer zirconia comes out more saturated and a bit darker when it’s only polished. So we judge the shade after the last firing, not before.
Final checks
A QC technician who didn’t make the crowns ran the final inspection, with an extra review because it’s front esthetic work. They checked margins, inner surfaces, seat, contacts, and the bite in center and forward movement. Then they checked color, translucency, texture and symmetry under a standard light, against the approved design and the shade plan.
The Finished B1 Zirconia Crowns
What the dentist told us
The B1 zirconia crowns seated without any adjustment, and the dentist cemented them with an MDP resin cement .
What the patient told us
Through the dentist, the patient said the smile looks brighter in photos, and nobody has asked them which teeth are crowns .
The trade-offs
Send Us Your Own B1 Zirconia Crowns
Planning B1 zirconia crowns next to natural teeth that are staying darker? Here’s what helps us most.
- Characters: if a white spot, crack line or texture is hard to describe, send a picture. You can circle what you want changed on any image.
- Rx: use our Rx form and see how to send a case. Write “pre-glaze try-in” on it if you want one.
- Build: full-contour multilayer zirconia or layered zirconia, whichever suits the bite and the look. We never change a material without your OK.
- Lead time: B1 zirconia crowns generally take 5–7 working days at the lab. Design approval adds 1–2 days.
- Shipping: you pay to send work to us, and we pay to ship finished work back.
- Warranty: 3 years on crowns.
- Quotes: itemized to your Rx, not one bundled price. Ask for the price list.
All of this happens in our own four labs in Shenzhen and Huizhou, China. We’ve been at it since 2012, with about 460 people, and nothing gets outsourced.
Istar is an FDA-registered establishment, Registration Number 3039441248, which you can look up in FDA’s establishment database. The lab runs under ISO 13485. You can also book a factory or video visit.
Got a patient who wants B1 zirconia crowns next to teeth that are staying darker? Send it as a test case, and tell us which teeth aren’t getting work. Send your first case or talk to us.
FAQ
What if the shade is off when the crowns arrive?
If the crowns don’t match the confirmed Rx and shade plan, we remake them free. If the target shade changes after that, it usually isn’t a free remake, though we’ll talk it through with you case by case.
Can I send phone photos for zirconia crown shade matching?
We’d rather you didn’t. Phone filters shift color easily, and that throws off what the technician sees.
Can I mail you a physical shade tab or an old crown?
Yes. Both are fine as references.
Which scanners do you take?
3Shape TRIOS, Medit, iTero, CEREC, Shining3D Aoralscan and Planmeca, plus any scanner that exports open files.
Can you rush B1 zirconia crowns?
Yes, at no extra charge, for clients who send 10 or more cases a month. We guarantee the ship date. The arrival date depends on customs, so we can’t guarantee that.