Custom Dental Whitening Trays, Made to Your Prescription
Istar Digital Dental Lab makes custom dental whitening trays for dental practices and dental labs, formed on each patient’s model and finished to the design on your prescription. You choose the arch, the teeth covered, whether the tray carries reservoirs, and how the border is trimmed. Our technicians build the tray to match. Every tray is made in-house on the same thermoforming line as our night guards and Essix retainers, so whitening cases fit easily into the rest of your appliance work.
What Makes Custom Dental Whitening Trays Work
A whitening tray does one job: it holds the gel you prescribe against the teeth being treated for the full wear time. How well it does that depends on fit. A tray that seats closely on the facial and lingual surfaces holds a thin, even layer of gel. A loose or overextended tray lets gel drift toward the gingiva. The ADA’s overview of tooth whitening notes that dentist-supervised trays are made to minimize gel contact with the gingiva, and it links gingival irritation to poor-fitting trays.
That’s why all of our custom dental whitening trays start from the patient’s own model instead of a stock shape. It’s also why the border and reservoirs follow your Rx, not a lab default. Gel choice, concentration and wear schedule stay with you as the prescribing dentist. We make the appliance that delivers the gel.
Design Options to Specify on Your Prescription
Four choices define a whitening tray. Put all four on the Rx, and the case can go straight into production without a clarification call.
| Rx field | Options | What it changes |
|---|---|---|
| Arch | Upper, lower or both | How many trays are made |
| Teeth covered | Full arch, or a range you name (for example, second premolar to second premolar) | Where the tray extends and where gel is delivered |
| Reservoirs | None, or facial reservoirs on the teeth you specify | Adds space for gel over the facial surfaces |
| Trimline | Scalloped along the gingival margin, or straight and extended past it | How the border meets the soft tissue |
If the prescription and the scan don’t agree, we pause the case and check with you before the tray is formed.
Reservoirs: What the Evidence Shows
To make a reservoir, we block out the facial surfaces of the model before forming the sheet. This leaves a small space between the tray and the tooth. Reservoirs are often sold as a way to whiten faster, but the clinical data don’t support that. A 2019 systematic review of nine randomized trials found no evidence that reservoirs improve color change. A later split-mouth equivalence trial had 46 patients use 10% carbamide peroxide for three weeks. Color change was equivalent with and without reservoirs. Tooth sensitivity and gingival irritation didn’t differ either, and the reservoir trays used more gel.
So the choice comes down to preference and gel use. Some clinicians want extra room for gel on the facial surfaces. Others prefer a closer-fitting tray that takes less gel each time it’s loaded. We make either one, exactly as prescribed.
Scalloped or Straight Trimline
A scalloped border follows the gingival margin tooth by tooth. A straight, or non-scalloped, border is trimmed in a smooth line that extends past the margin. In a randomized split-mouth trial of 120 patients, the two designs showed no significant difference in gingival irritation, tooth sensitivity or color change. Pick the trimline that suits your technique and your patient’s comfort. If you want a specific extension past the gingival margin, write it on the Rx in millimeters.
Custom Bleaching Trays Are Not Night Guards or Retainers
Patients sometimes ask whether they can put whitening gel in a night guard or a clear retainer they already have. Each appliance is built for a different job. Custom bleaching trays are gel carriers. They cover the teeth up to the gingival margin, so the gel reaches the cervical areas. A night guard is designed to take clenching and grinding forces, and its coverage is set for that purpose rather than for holding gel. A retainer is made to hold tooth position. Its tight fit leaves no space for gel.
A whitening tray isn’t built to stand up to bruxism, so a patient who grinds needs a separate appliance. Prescribe a night guard alongside the trays. Istar Digital makes whitening trays, night guards and Essix retainers in-house on one thermoforming line, so you can order all three in the same case.
How Custom Teeth Whitening Trays Are Made at Istar Digital
Model. Custom teeth whitening trays are only as accurate as the model they’re formed on. We print a model from your intraoral scan. In our experience, printed models reproduce scan data more accurately than milled ones. Physical impressions are poured into models in the lab.
Block-out. If you prescribe reservoirs, we block out the teeth you specify. Otherwise, the model goes to forming as is.
Forming. We heat the sheet evenly, form it under steady pressure and let it cool under pressure before removing it. This way the tray keeps the exact shape of the model.
Trimming and finishing. We trim the tray to your prescribed line, then smooth and polish the edges. Technicians check every edge by touch and by eye for sharp spots. The inner surface is only lightly adjusted, if at all, so the tray seats the way it was formed.
Quality Checks Before Every Case Ships
At final inspection, we seat each tray on its model to confirm fit. We check the border and reservoirs against the Rx and make sure no edges are rough or lifted. A tray that fails is remade before the case ships, without waiting for you to flag it. If your practice or lab has its own acceptance criteria, send them in writing at the start. Once we agree on them, they become the standard each of your cases is inspected against. Finished trays are cleaned, labeled with the patient or case number and packed individually.
After delivery, if a tray has a factory defect, such as not seating or a rough or lifted edge, we remake it free of charge and pay to ship the new tray back to you. Read more about our quality control process.
How to Send a Whitening Tray Case
Digital cases. We accept scans from 3Shape TRIOS, Medit, iTero, CEREC, Shining 3D Aoralscan, Planmeca and any scanner that exports open files. Send STL or PLY files through 3Shape Communicate, Medit Link, WeTransfer or email. iTero and CEREC users should export STL or PLY rather than send native files. Include the Rx with the four fields above. More details are on our digital case submission page.
Impressions. We can send you a shipping label, or you can ship the impressions yourself and send us the tracking number. You pay to ship impressions to Istar Digital, and we pay to ship the finished trays back.
Why Dental Practices and Labs Send Whitening Trays to Istar Digital
A full-service lab, not a broker. Istar Digital has made dental restorations and appliances since 2012. We have four labs in Shenzhen and Huizhou and about 460 staff, and we do all production in-house without outsourcing. The team that forms your whitening trays works in the same company that makes your crowns, implant restorations and dentures.
A team you can choose. Our four labs use largely the same materials, but each has its own technician and service team. You can compare how the teams perform and route your cases to the one you prefer.
Clear communication. Reach your coordinator by email, WhatsApp or video call. We confirm turnaround when your case is logged, counting from the day we receive it.
Documented compliance. Istar Digital is an FDA-registered establishment (Registration No. 3039441248), which you can verify in the FDA establishment registration database. Our lab works under an ISO 13485 quality management system.
Custom Dental Whitening Trays FAQ
Is there a minimum order for whitening trays?
No. A single trial case is welcome, and many new clients start that way. For ongoing work, our partnerships are set up for a regular flow of cases, which keeps international shipping practical.
How are whitening trays priced?
We quote line by line against what you order, not as one bundled price. You’ll know the full cost before production starts. For current rates, ask your sales manager for the B2B price list.
Can you rush a whitening tray case?
Yes, at no extra charge, for clients who send us 10 or more cases a month. We guarantee the ship date. The arrival date depends on the courier and customs.
Can you send photos of the trays before they ship?
Yes. Ask for QC photos on any case, and we’ll send them before dispatch.
Can our lab have trays shipped straight to our client's practice?
Yes. We ship to any address you name, and the packaging, labels and paperwork can leave out the Istar Digital name. The courier waybill will still show our sender address.
Are whitening trays and bleaching trays the same thing?
Yes. “Whitening tray” is the term most patients and manufacturers use. Clinical literature usually says bleaching tray or tray bleaching. Whichever term your Rx uses, we make the same custom bleaching trays.
Send Your First Whitening Tray Case
The best way to judge our custom dental whitening trays is to seat one. Send a trial case with your preferred reservoir and trimline settings, and we’ll make it exactly as written.
- Send a test case: upload a scan or ask us for a shipping label.
- Request the price list: get B2B pricing for whitening trays and the rest of our range.
- Book a factory or video visit: see our thermoforming line and QC process before you commit your case flow.