FDA Reg. 3039441248 · EU MDR · UK MHRA · ISO 13485
9:30–18:00 China time (UTC+8)
Night guard
Guards & Retainers

Soft Night Guard: Custom Soft Occlusal Guards Made to Your Rx

A soft night guard from Istar Digital Dental Lab is a custom, full-arch guard in resilient thermoplastic, formed on a model of your patient’s arch. We make them for dental clinics, DSOs, and dental labs that would rather send guards out than tie up a chairside vacuum former. Hard and hard-soft guards are covered on our night guard dental lab page.

01 · Case selection

Where a Soft Night Guard Fits, and Where It Doesn't

Prescribing a Soft Night Guard for Teeth Grinding

A soft night guard for teeth grinding is usually prescribed for patients who grind or clench at night and need their teeth and restorations protected, especially when a hard guard is likely to end up in a drawer. Payers frame the indication the same way. UnitedHealthcare’s occlusal guard policy lists bruxism or clenching that causes wear or fractures of teeth or restorations, and protecting natural teeth that oppose porcelain or ceramic.

Set the patient’s expectations around protection. A 2021 systematic review in the Journal of Dentistry found insufficient evidence that occlusal splints treat bruxism better than no treatment or other options. Where a benefit is suggested, it’s for tooth wear, as an earlier Cochrane review noted. A guard shields the dentition; it doesn’t stop the habit.

SoftHardHard-soft (dual laminate)
Occlusal surfaceResilient thermoplasticRigidRigid outer layer over a soft inner layer
Chairside adjustmentLimited: resilient material doesn’t grind and polish like acrylic, so precise occlusal refinement isn’t practicalPrecise selective adjustment at delivery and recallsOn the hard surface

When to Prescribe Something Else

  • The appliance is meant to treat a TMD. The same UnitedHealthcare policy states that occlusal guards aren’t indicated for TMD treatment, which is handled under a separate policy.
  • The patient snores or you suspect sleep-disordered breathing. That needs its own assessment, and a night guard isn’t a sleep apnea appliance.
  • The guard is for sport. Athletic mouthguards are a separate appliance with different design goals; see our custom dental guard range.

Coding: D9945 Applies to Soft Guards Only

D9945 covers a soft occlusal guard on a full arch. There’s no soft partial-arch code. Under ADA guidance on guards with hard and soft components, any guard with a hard occlusal component is reported as a hard appliance (D9944 or D9946), because the material that contacts the occlusal surface decides the code. Write the construction you want on the Rx so the guard you receive matches the code you report. Coding and benefits remain your office’s decision.

02 · Rx

What to Put on the Rx

Thickness, arch, and coverage are clinical decisions, so we make the guard to what you write rather than to a house default. A complete Rx covers:

  • Arch: maxillary or mandibular.
  • Thickness: the value you want, and which measurement it refers to .
  • Coverage and extension: full arch, plus how far the guard should extend onto the buccal and labial surfaces and toward the gingiva. Note it if you want minimal labial coverage or a slimmer profile for lip seal.
  • Relief areas: tori, sensitive gingiva, deep undercuts, recession, or restorations you want the guard to avoid loading.
  • Brand preference: if you work with a particular sheet brand, name it and we’ll use it.

If the Rx and the records don’t agree, for example the Rx names teeth or an arch the records don’t show, we contact you before we start rather than guessing.

03 · Thickness

Soft Night Guard Thickness: Sheet vs Finished Guard

“3 mm soft guard” can mean two different guards. Most labs quote the thickness of the thermoplastic sheet before forming. Once that sheet is heated and drawn over the model, it stretches and thins, most over cusp tips, incisal edges, and convex buccal surfaces. The finished guard is thinner than the sheet, and not evenly thinner.

The forming method changes where the thinning happens. A study comparing vacuum-formed and pressure-formed mouthguards found that thickness varied by site with both methods: pressure forming left the incisor area thinner, while vacuum forming thinned the molar area more. Neither method produces a uniform shell.

That’s why we measure the finished guard, not just the sheet. Before shipping, each guard is checked with calipers at multiple points and compared with the thickness on your Rx, finished or sheet, whichever you specified.

04 · Fabrication

How We Make Each Soft Occlusal Guard

Records Check

Digital scans are checked within one working day of upload. If a scan has noise, missing areas, a bite error, or holes, we tell you right away so a rescan doesn’t eat into your patient’s appointment. Physical impressions are checked on arrival for distortion, bubbles, an incomplete arch, and an incorrect bite.

Printed Models

We form guards on 3D-printed models, which in our experience reproduce the scan more accurately than milled models. Our printers are checked against standard test pieces at regular intervals, so a dimensional drift is caught on a test print, not on your patient’s guard.

Bite Verification

Before forming, the intraoral scan and the bite record are checked against each other, and the models are mounted on an articulator to verify the jaw relationship and occlusal contacts a second time.

Thermoforming and Finishing

Soft guards are thermoformed. The sheet is heated evenly, adapted under stable pressure, and cooled at a steady rate while still under pressure before it’s released from the model. Controlled cooling under pressure helps the guard hold the shape it took on the model.

After trimming and polishing, the tissue-side surface is only lightly touched up, if at all, because heavy grinding there is a common reason a guard won’t seat.

05 · Inspection

Final Inspection Before Your Soft Night Guard Ships

Along with the thickness readings, every guard is inspected on the model before packing:

CheckWhat we look for
BordersSmooth, no burrs or lifted edges, extension as prescribed
AdaptationClose fit to the model with no gaps
RetentionSeating and removal on the stone model to judge grip
MaterialNo cracks, bubbles, or inclusions

A guard that fails any check is remade automatically, not sent with a note. The patient ID stays on the work order, model, and guard from intake to shipping, and each finished guard is cleaned with high-pressure washing, disinfected, and packed individually with its patient label.

Across all our product lines, 95% of cases pass final inspection the first time. That figure is measured in our lab before shipping. The separate figure that matters to you is our remake rate, the share of cases clients send back, which runs at 2–3% across the lab.

06 · Submission

Sending a Soft Night Guard Case

Digital caseImpression case
ArchesFull-arch scan of the arch receiving the guard and a full-arch opposing scanFull-arch VPS or polyether impressions of both arches
FormatSTL, PLY, OBJ, DCM, or 3Shape .3oxz, from 3Shape TRIOS, Medit, iTero, CEREC, Shining3D, or PlanmecaAlginate isn’t suitable for international shipping: it shrinks and distorts in transit
Bite recordDigital bite scanVPS bite registration rather than wax, which softens and distorts in transit
How to sendEmail, WeTransfer, 3Shape Communicate, or Medit Link; one zipped folder per case (not RAR), one case ID across files and RxDisinfect, pack, and ship with your Rx, then send us the tracking number. We can provide a shipping waybill
Overall timeShorter: no inbound shipping or customsAdd transit and customs time

For scan export settings and file-size limits, see our digital dental laboratory page. For packing impressions, follow our how-to-send guide.

07 · Turnaround

Turnaround, Rush Cases, and Pricing

Soft night guards take 5–7 working days in the lab. The clock starts the day we receive complete records. Time spent waiting for missing records or answers to our questions isn’t counted, and neither are weekends, Chinese public holidays, international shipping, or customs clearance. We notify you when production is complete and again when the case ships, with the tracking number.

Rush service is free for all case types for clients who send 10 or more cases a month. On a rush case we guarantee the ship date; the arrival date depends on the courier and customs.

Quotes are itemized to what you order rather than bundled. You pay to send impressions, models, or a guard returned for remake to us, and we pay to ship finished guards back to you, remakes included. Request our current price list for guard fees.

08 · Warranty

Warranty and Remakes

Soft night guards carry a one-year warranty. Report any problem within 24 hours of receiving the case, with the patient name, case number, a description, and photos, and we’ll identify the cause with you before remaking. Lab-caused problems, such as a guard that doesn’t seat, lifted borders, or a bite that doesn’t match the records, are remade free of charge, and remakes go to the front of the production queue.

A remake is charged when the requirements change after production, or when we flagged a poor impression or scan before starting and you asked us to proceed with it anyway.

09 · Why Istar

Why Clinics and Labs Send Us Their Guards

Istar Digital Dental Lab has made dental restorations and appliances since 2012. We run four labs of our own in Shenzhen and Huizhou, China, with about 460 staff, and nothing is outsourced: every step of your case stays in our own labs.

Istar Digital Dental Lab is an FDA-registered establishment, Registration Number 3039441248, which you can verify in the FDA establishment registration database. Our labs operate under an ISO 13485 quality management system. You’re welcome to see the guard line for yourself on an on-site visit or a video tour of the factory; learn more about Istar Digital.

FAQ

Soft Night Guard FAQs

Can you switch materials if my specified sheet isn't available?

Only with your consent. We never substitute a material without asking first, and a verbal or written OK both count.

Yes. Dental labs can have finished guards delivered to any address they give us, such as the prescribing office. The sender address on the waybill can’t be changed.

Within 24 hours of delivery, send us an unboxing video that shows the courier label, along with the damaged guard, and keep the original packaging. With that evidence, we remake it free of charge. Damage after delivery is remade at cost.

Customer service works 9:30 a.m. to 6:00 p.m. China time (UTC+8) and stays available until midnight for urgent cases.

Send Your First Soft Night Guard Case

The fastest way to judge our guards is on one of your own patients. Single trial cases are welcome, and ongoing partnerships work best with a regular flow of cases.

  • Start a case: upload your scans or ship your impressions with a completed Rx form.
  • Ordering guards in volume, or for several prescribers? Talk to our team about setting up your account.