Titanium Dentures: Partial Frameworks and Palatal Plates Designed for Titanium
Titanium dentures from Istar Digital Dental Lab are removable partial dentures built on a pure titanium framework, plus titanium palatal plates for complete dentures. We make them to your Rx for clinics and dental labs across the US and Europe. Looking for a fixed full-arch prosthesis on a titanium bar? That’s an implant case, covered by our full-arch dental lab.
What You Can Order
| Option | What you receive | Who it suits |
|---|---|---|
| Framework only | The finished titanium framework, seated on the master model | Clinics that process in-house, and dental labs outsourcing the metal stage |
| Framework try-in, then finish | The framework for an intraoral try-in, then teeth and acrylic once you send it back | Distal extensions, and any case where you want to confirm seating before the teeth go on |
| Finished partial denture | Framework, denture teeth, and acrylic base, ready to deliver | Cases with complete records |
| Complete denture with a titanium palatal plate | A maxillary complete denture with a titanium palate in place of acrylic | Covered in the titanium denture plate section below |
If you design frameworks yourself, send an editable exocad or 3Shape file and we’ll fabricate and finish it. For acrylic, flexible, and implant-retained options, see our removable denture lab.
Titanium Dentures vs Cobalt-Chromium: What Changes in the Framework
Lighter, But Not by the Numbers You May Have Seen
Titanium is about half as dense as cobalt-chromium (about 4.5 g/cm³ against 8.3–8.5 g/cm³), so an identical piece of metal weighs about 45% less. That’s the honest ceiling. A finished titanium framework usually saves somewhat less, for the stiffness reason explained next. Any claim that titanium is “400% lighter” is physically impossible: nothing can be more than 100% lighter.
More Flexible, So Designed Differently
Titanium flexes about twice as much as cobalt-chromium for the same cross-section. A design copied straight from a Co-Cr case will flex more under load than the original was planned to. In a two-year randomized trial of titanium and Co-Cr partial dentures, titanium had more early failures in the first 12 months but matched Co-Cr’s overall success by 24 months. The authors concluded that titanium’s lower rigidity has to be taken into account in the design.
In practice, that means wider or thicker major connectors, and careful attention to rest seats and indirect retention on distal extensions.
Clasps Retain Less Force
A 2024 systematic review of titanium and PEEK frameworks found that titanium clasps had significantly lower retention force and fatigue life than cobalt-chromium clasps.
So we don’t promise that titanium clasps grip harder or last longer. They don’t. What helps is choosing the clasp type, length, and undercut engagement for titanium rather than reusing Co-Cr dimensions. Repeated chairside tightening fatigues any clasp, and a titanium clasp that keeps needing it usually points to a design or undercut problem.
Metal Allergy: A Real Indication, Not a Guarantee
A literature review of titanium removable dentures found no reports of metal allergy apparently caused by commercially pure titanium dentures, and recommended titanium as protection against metal allergy. A 2024 systematic review also rated its biocompatibility adequate for clinical use. Neither makes titanium hypersensitivity impossible, so base the decision on the patient’s allergy history.
The 2008 review also lists titanium’s known drawbacks: it’s harder to cast, machine, and polish, and early reports noted surface discoloration, plaque adhesion, and resin detaching from the framework. The review describes these clinical problems as gradually resolved.
When a Titanium Partial Denture Fits the Case
A titanium framework is a good fit for:
- Patients with documented nickel or cobalt sensitivity, where a cobalt-chromium framework is ruled out.
- Large frameworks, such as complete palatal plates, anterior-posterior designs, and long lingual plates, where there’s enough metal for the weight saving to be noticeable. On a small tooth-bounded framework, the saving is small in absolute terms.
Consider another material when:
- Interocclusal or palatal space is limited and the connector can’t be made bulkier. Our cobalt-chromium partial denture or Vitallium denture stays rigid in thinner sections.
- Retention depends on very few clasps on a demanding distal extension. A stiffer alloy gives more retention per clasp.
- Visible clasps in the smile zone are the patient’s main concern. A flexible partial denture avoids metal clasps, though it suits lighter loads and smaller base coverage.
We make frameworks in pure titanium, cobalt-chromium, Vitallium, and PEEK, so changing the material doesn’t mean changing labs. We never substitute one for another without your consent, written or verbal.
Titanium Denture Plate: Palatal Plates for Partial and Complete Dentures
When an Rx asks for a “titanium denture plate,” it can mean two different things, and they’re different cases.
The Plate as a Major Connector
On a partial denture, “plate” usually means the major connector: a complete palatal plate on a maxillary case, or a lingual plate on a mandibular case. Write the connector you want on the Rx, such as a palatal strap, an anterior-posterior palatal bar, a complete palatal plate, a lingual bar, or a lingual plate. If you leave it open, we’ll recommend one.
A Titanium Palate for a Complete Denture
On a complete denture, a titanium palatal plate replaces the acrylic palate with thin metal, while the teeth and the rest of the base stay acrylic. A comparison of titanium-base and resin-base maxillary complete dentures found no significant difference in patient adaptation, retention, or the condition of the mucosa. The authors considered titanium bases suitable for dentures under heavy mechanical stress, such as a maxillary complete denture opposing natural teeth.
For these cases, send final impressions, a wax-rim jaw relation record, a facebow transfer, the old denture if the patient has one, and shade and smile photos. We provide a wax try-in before the denture is processed.
What to Send for Titanium Partial Dentures
A framework is only as accurate as the records and mouth preparation behind it.
| Your office | Istar Digital Dental Lab |
|---|---|
| Diagnosis, treatment plan, and material choice | Survey of the master model: path of insertion, survey lines, undercut depth |
| Mouth preparation: rest seats, guide planes, any recontouring | Framework design proposal for your approval |
| Final impression or scan, opposing arch, and bite record | Framework fabrication and finishing |
| Framework try-in, when staged | Teeth setup, processing, and polishing |
We can’t create rest seats or guide planes on the model if they aren’t in the mouth. Tell us on the Rx which teeth you prepared.
Records and Rx Details
- Master impression or scan with clear rest seats and abutment contours, plus the opposing arch.
- Bite record. Use a wax rim where too few teeth remain to hold a stable occlusion.
- Material: write “pure titanium framework,” so there’s no question about the alloy.
- Your design, if you have one, marked on the Rx or the model. Tell us if the design was planned for titanium or adapted from a Co-Cr case.
- Shade and tooth mold for finished partials, plus photos when anterior teeth are involved.
Digital Files
We accept scans from 3Shape TRIOS, Medit, iTero, CEREC, Shining3D, and Planmeca, in STL, PLY, OBJ, DCM, or 3Shape .3oxz, and we receive cases by email, WeTransfer, 3Shape Communicate, and Medit Link.
Zip each case in its own folder (not RAR), with one case ID across the files, the Rx, and the photos. We check incoming scans within one working day and tell you right away if a rescan is needed. Our digital dental laboratory page covers the full digital workflow.
Design Approval Before the Framework Is Made
Before any titanium is fabricated, we can send you the framework design to approve, as a screenshot or file by email or in your case group chat. It marks:
- Clasp types and positions, such as I-bars and circumferential clasps
- Rest positions
- Major and minor connector dimensions
- Retention mesh coverage for the denture base
Complex framework partials always go through this step, and any other case can on request. Approval adds 1–2 working days. Changes you ask for early in the approval stage don’t affect the turnaround or the fee.
How We Finish and Inspect Titanium Frameworks
- Separate handling. Titanium has its own tools, sandblasting and polishing equipment, and recycling stream, so it never picks up particles from the other alloys we work with.
- Validated equipment. Our metal-processing and heat-treatment equipment goes through installation, operational, and performance qualification (IQ/OQ/PQ), with periodic requalification.
- Mechanical retention for the acrylic. The resin bond relies on retention mesh, beads, or grooves and a sandblasted, degreased surface. Primers support the bond but never replace mechanical retention, which is what keeps the base from separating from the titanium.
Every framework is then checked on the master model before it ships:
- Defects: visual and magnified inspection for porosity, cracks, and distortion
- Seating: smooth, with no rocking
- Clasps: form and flexibility against the planned undercut
- Rests: fully seated
- Connectors: cross-sections and transitions as designed
- Occlusion: no interference with the opposing arch
Finished partials pass four checkpoints: the model, the wax setup, the tooth arrangement, and the final processed denture. The final check covers centric and excursive contacts, base extension and thickness, and a polish that leaves the tissue surface and borders unaltered. Bubbles, porous areas, poor adaptation, or an inaccurate bite mean a remake before the case leaves us.
Repairs and Added Clasps on Titanium Frameworks
Titanium frameworks can be modified later. We laser-weld titanium, so we can add a clasp to an existing framework when an abutment changes. We also repair bases and add teeth, using resin of the same type as the original. The old acrylic is roughened and cleaned so the new resin bonds, processing temperatures stay low enough not to damage the denture, and each repair is strength-tested before it ships.
For a repair or addition, send upper and lower models, the existing partial, and a wax bite.
Turnaround, Quotes, and Shipping
| Case | In-lab time |
|---|---|
| Simple cases | 2–3 working days |
| Complex cases | 5–7 working days |
In-lab time counts working days from the day we receive complete records. Each stage of a staged case is scheduled separately, and time spent waiting for records or replies, including design approval, isn’t counted. Weekends and Chinese public holidays aren’t production days, and international shipping and customs clearance aren’t part of in-lab time. We’ll tell you which category your case falls into when we review it.
Rush service is free for clients who send 10 or more cases a month. We guarantee the ship date on rush cases, but not the arrival date, because customs clearance is outside our control.
Quotes are itemized to the option you order rather than bundled into one price, and you can confirm the full cost before production starts. Request our removable price list for current fees. You pay to send impressions or models to us, and we pay to ship finished work back to you, remakes included.
Warranty and Remakes
Titanium partial dentures carry a one-year warranty covering the framework and the acrylic. We remake or adjust lab-caused problems free of charge, including:
- A partial that doesn’t seat
- Lifted borders
- A poorly placed clasp
- An inaccurate bite
- Unsatisfactory esthetics or acrylic color
For a remake, sending the original appliance or new records to us is at your cost.
Registrations and Material Documentation
Istar Digital Dental Lab is an FDA-registered establishment. Our Registration Number is 3039441248, which you can verify in the FDA establishment registration database. Our device listings cover partial and complete dentures. For clinics in the EU, custom-made dentures follow the MDR custom-made device procedure, and we prepare the statement for each case. Our labs operate under an ISO 13485 quality management system.
On request, we include batch and composition documentation for the titanium used in your case. Every case carries a unique number that links it to the technicians, equipment, material batches, and inspection results behind it.
Why Clinics and Labs Send Us Their Titanium Cases
Istar Digital Dental Lab has made dental restorations since 2012, and has worked with more than 50 dental labs, 100 clinics, and 400 dentists. We run four labs in Shenzhen and Huizhou, China, with about 460 staff.
Removable work has its own department of about 55 people, and a separate quality control department of about 25 checks work across all four labs. The removable line handles about 4,000 cases a month in a normal season and about 6,500 at peak, and when a large order comes in, cases already scheduled keep their place.
Nothing is outsourced: design, framework fabrication, finishing, setup, and processing all happen in our own labs. You’re welcome to see it for yourself on an on-site visit or a video tour of the factory.
Titanium Denture FAQs
Which CDT code applies to a titanium partial denture?
There’s no titanium-specific code. CDT describes the prosthesis, not the alloy, so a titanium framework partial with resin bases is generally reported like other cast metal framework partials: D5213 for maxillary and D5214 for mandibular. Coding and payer rules are the treating dentist’s decision.
Can you ship finished cases directly to my client's office?
Yes. We ship to any address you give us, so a dental lab can have finished partials sent straight to the prescribing clinic. The sender address on the waybill can’t be changed.
Can you keep each dentist's design preferences on file?
Yes. Our case system records design preferences separately for each dentist, which helps group practices and DSOs with several prescribers. Our four labs share largely the same materials but have separate technician teams, and if you prefer one team’s work, we’ll assign your cases to it.
What are your office hours, and how fast do you reply?
Our customer service team works 9:30 a.m. to 6:00 p.m. China time (UTC+8), and stays available until midnight for special or urgent cases. During working hours, technical questions usually get an answer within an hour. Outside them, the time difference can stretch that to 7–8 hours, but never more than 12.
How does billing work?
We accept bank transfer and PayPal. Transfer fees are paid by the sender, at the exchange rate on the day of payment. Invoices are issued per batch, or as a monthly statement for some accounts, and show your case number, patient ID, or purchase order number. New clients can apply for one-month payment terms.
What happens if a case arrives damaged?
Within 24 hours of delivery, send us an unboxing video that shows the courier label, along with the damaged piece, and keep the original packaging. With that evidence, we remake the case free of charge. Damage that happens after delivery is remade at cost.
Start Your First Titanium Denture Case
The quickest way to judge a titanium framework is one case on your own patient. Single trial cases are welcome, and ongoing partnerships work best with a regular flow of cases.
- Digital case: send your scan files with a completed Rx form.
- Impression case: follow the how-to-send guide. We can send you a prepared shipping waybill, or you can ship to our address and send us the tracking number.
- Not sure titanium is right for the case? Send the records and ask for a design and material recommendation before you commit.
Questions before your first case? Contact our removable team.