Night Guard Dental Lab: Guards Made and Measured to Your Prescription
A night guard that comes back thicker than you prescribed tends to end up in a drawer. One that needs a long session of chairside grinding costs you the appointment. Istar Digital is a night guard dental lab inside a full-service dental lab. We make hard, soft and dual-laminate night guards, occlusal splints and sports mouth guards to your prescription.
Before a guard ships, we measure the thickness of the finished guard, check the bite on the articulator and test the fit on the model. We pay the shipping back to you, remakes included.
Night Guards and Splints We Make
A guard puts a layer of material between the teeth, so grinding and clenching wear the guard instead of the enamel or a new restoration. That’s also what the evidence supports: a Cochrane review of occlusal splints for sleep bruxism found too little evidence that splints treat the bruxism itself, but a possible benefit for tooth wear. The diagnosis, the appliance and the design are yours, and we build to them.
A rigid, full-coverage guard with a flat occlusal surface for even contacts, in the arch and thickness you prescribe. Best for: heavy grinders and clenchers.
A flexible thermoformed guard, in the arch and thickness you prescribe. Best for: mild to moderate grinding or clenching, and muscle fatigue from clenching.
A soft inner layer against the teeth, bonded to a hard outer layer that takes the bite and can be adjusted. Best for: patients who need a hard occlusal surface but find an all-hard guard uncomfortable.
Occlusal and Bite Splints
Splints made to the jaw position and design on your prescription. We check the bite against your scan and bite record, then again on the articulator. Best for: splint therapy you prescribe and follow up.
Periodontal Splints
Splints made to the teeth and span on your prescription. Best for: periodontal cases you’ve decided to splint.
Custom guards made on the patient’s own model, built for impact rather than for grinding. Best for: patients in contact sports. → Sports guards
Looking for Hawley, Essix or bonded retainers? They’re made by our orthodontic team. → Orthodontic Laboratory
How Our Night Guard Dental Lab Checks Every Guard
The usual complaints about a lab-made guard are that it’s thicker or thinner than you asked for, that the bite needs heavy adjusting, or that it’s too tight or too loose. Each of them has its own check before a guard leaves our lab.
1. An Accurate Model to Form On
A thermoformed guard can only fit as well as the model under it.
- We check your scan within one working day and tell you right away if there’s noise, a hole or a wrong bite.
- Models are printed in-house from your scan.
- We print standard test pieces regularly and measure them to catch any printer drift.
Your part: scan both arches and the bite, or send upper and lower impressions, disinfected before shipping.
2. The Bite, Checked Twice
So the adjustment left for you in the mouth is a small one.
- First we confirm that your scan and your bite record agree.
- Then the models are mounted on an articulator and the guard’s contacts are checked against the jaw position you prescribed.
- If the records disagree, we ask you before we go on.
Your part: record the bite in the position you want the guard made to. For physical cases, use a PVS bite registration, not wax: wax softens in transit and can arrive with the bite closed down.
3. Controlled Forming, Measured Thickness
The thickness you prescribe is the thickness of the guard, not just of the sheet.
- The sheet is heated evenly, formed under steady pressure and cooled under pressure before release.
- The finished guard is measured with calipers at several points and compared with your prescription.
- A guard that doesn’t match goes back into production.
Your part: write the thickness and hardness on the prescription. We never pick them for you.
A sheet stretches as it forms, so the thickness on its label isn’t the thickness of the guard. A 2015 study in Dental Traumatology found that both EVA and acrylic sheets thinned most on the steepest surfaces of the model, such as the labial face of the incisors. That’s why we measure the guard itself.
4. A Fit You Can Check on Arrival
It seats in the mouth the way it seated on the model.
- The fitting surface gets only the lightest finishing, because heavy adjusting there can stop a guard from seating.
- Edges are smoothed and checked for extension, with no burrs or lifted borders.
- Retention is tested by seating and removing the guard on the stone model.
- Anything with a crack or a bubble isn’t shipped.
- Each guard is cleaned under high pressure and packed in its own bag, labeled with its patient number.
Your part: check the fit and the bite when the case arrives, and tell us within 24 hours if anything’s wrong.
Dental Lab Mouth Guards for Sports
A night guard and a sports guard solve different problems. A night guard should be slim, with precise contacts, so the patient can sleep in it. A sports guard has to absorb a blow, so it’s usually thicker and covers more of the labial surface.
Every dental lab mouth guard we make for sport is built on a model of the patient’s own arch, not shaped in the mouth. Mark the case as a sports guard on the prescription and give us the design you want, and we’ll build it to that.
Working With Istar Digital as Your Night Guard Dental Lab
The same lab also makes your crowns, bridges, veneers, implant restorations and dentures, with about 460 people across four labs and no outsourcing. A guard can travel with the restoration it’s protecting, on one account.
Lab Time and Case Updates
Routine cases take 2–3 working days in our lab and complex cases 5–7, and we tell you which applies when we check your files. Lab time counts from the day a complete case arrives. Time spent waiting for your reply or for missing records isn’t counted, and transit and customs come on top. We let you know when production is done and when the case ships, with the tracking number.
Rush Cases
If you send 10 or more cases a month, rush service is free for every case type, and you can ask for it before or after we receive the case. We guarantee the ship date; arrival depends on transit and customs.
What Ships, and Who Pays
A digital case reaches us as a file, so there’s nothing to ship. If you send impressions or models, that shipping is on you. We pay to send every finished case back, remakes included, to any address you name.
Warranty and Remakes
Every guard and splint carries a 1-year warranty. If something is wrong, send us the patient’s name, the case number, the product, the problem and photos within 24 hours of delivery. We agree on the cause with you before remaking anything, and remakes go to the front of the queue. → Remake and Warranty Policy
Itemized Quotes
We quote each item on your prescription separately, not as one bundled figure. Your sales manager sends the current price list on request.
Registered and Open to Visit
Istar Digital is an FDA-registered establishment, Registration Number 3039441248, which you can look up in the FDA establishment registration database. Our labs run an ISO 13485 quality management system, and custom-made devices for the EU follow the MDR custom-made device procedure. You’re welcome to visit our labs in Shenzhen and Huizhou, or tour them by video.
Night Guard Production for Dental Labs
Guards take bench time that your technicians could spend on crowns and bridges. Send us the full case, or just the part you need: design only, production to your own design, or both. Work goes out under your name, and we never contact your dentists.
Frequently Asked Questions
Do you make guards for the upper or the lower arch?
Both. The arch is your call; put it on the prescription, and note it if the patient needs a guard for each arch.
Can you make a guard to protect new crowns or veneers?
Yes. Send a scan of the arch with the restorations in place, plus the bite. If we’re making the restorations too, the guard can be planned in the same case. → Veneers
Can we choose the sheet material or brand?
Yes. Name the brand on the prescription and we’ll make the guard from it. We never swap a material without your consent, written or verbal.
Can we reorder a guard from the original scan?
Yes. If you judge that the teeth and restorations haven’t changed, send the original scan again with a new prescription. There’s no need for a new impression.
Which scanners and file formats do you accept?
Any scanner that exports an open file: STL, PLY or OBJ, or DCM and .3oxz from 3Shape. Export iTero scans as STL or PLY from the iTero portal, and CEREC scans as STL or PLY, since we don’t accept their proprietary formats. → Send a Case guide
How do holidays affect our cases?
We don’t produce or ship on weekends or Chinese public holidays, and lab time pauses over them. You can still message us, but replies may be slower. Ahead of busy periods, we can send you cut-off dates for your cases.
Can we start with a single case?
Yes, and many new clients do. A night guard makes a good first case: you can measure its thickness and check its bite yourself. Single trial cases are welcome, and an ongoing partnership works best with a regular flow of cases.
Send a Case to Our Night Guard Dental Lab
What to Send
- Scans of both arches and the bite in an open format
- Or upper and lower impressions with a PVS bite registration, disinfected before shipping
- A prescription with the appliance type, the arch, the hardness, the thickness, any design notes, and the date you need it
- For sports guards, a note that it’s a sports guard and the design you want
- Clinic, dentist and patient details
For Your Quote
Tell us which guards you prescribe most, roughly how many cases you send a month, and whether you work from scans or impressions. Let us know which scanner you use, whether you’d like to send restorative cases too, and whether you’re a clinic or a lab. Your sales manager will reply with the price list.