Digital Dental Labs: Send the Scan, Not the Impression
Working with digital dental labs overseas used to mean mailing an impression across an ocean and hoping it arrived in shape. A scan changes that. Istar Digital Dental Lab takes the files your scanner already exports, checks every scan within one working day, and sends you the design to approve before anything is milled. Our own labs in Shenzhen and Huizhou make the case, independent QC staff release it, and we pay to ship it back to you.
Three Ways to Work With Our Digital Dental Labs
Send us the whole case, or only the step you need. Most clients start with one of these.
Full Production From Your Scan
Upload a scan and an Rx. We design, mill or print, finish by hand, inspect and ship the case, from a single crown to a full arch. Best for: clinics and DSOs working with an intraoral scanner. → Jump to: What We Make From Your Scan
Digital Dentures
Complete and partial dentures from a scan, an impression or both, with a try-in before the final base is processed. Best for: practices moving removable work into a digital workflow. → Jump to: Istar Digital as Your Digital Denture Lab
Design-Only or Milling-Only
We design on your libraries and send the file back, or we mill and finish a design you’ve made. Best for: dental labs, and practices that mill or print in-house. → Jump to: Digital Dental Design Services
What We Make From Your Scan
Everything below is made in our own labs from the same scan-to-delivery workflow. Each product page covers materials, indications and what to send.
Zirconia Crowns and Bridges
Monolithic, multilayer and layered zirconia, milled from your STL. Send a PLY for anterior units so we can see the tissue. Best for: posterior strength, bruxism and tight occlusal space, through to anterior esthetics. → Zirconia Dental Lab
E.max Crowns, Veneers, Inlays and Onlays
Lithium disilicate pressed from IPS e.max Press, with the design approved before pressing for anterior multi-unit cases. Best for: anterior esthetics, veneers, inlays and onlays. → Veneers · E.max Dental Crowns and Bridges
PFM and Full Cast Crowns
Porcelain fused to metal, and full cast crowns in cobalt-chrome or high precious alloy, from the same digital records. Best for: posterior units, limited clearance and cases where you want metal. → Crown and Bridge Dental Lab · CoCr Full Cast Crown · SP / High Precious Full Cast Crown
Implant Restorations
Custom abutments, Ti-base crowns, screw- and cement-retained crowns and implant bridges, designed on the right implant library. Custom abutments take 3–4 working days. Best for: single implants and partially edentulous spans. → Implant Dental Laboratory
All-on-X Full Arches
Fixed full arches in zirconia or PFM, with a PMMA prototype first when you want a try-in. Full arches take 5–7 working days. Best for: edentulous and failing dentitions on four or more implants. → All-on-X Full-Arch
Complete and Partial Dentures
Digital, hybrid or conventional workflows, with milled or printed bases and a try-in before final processing. Best for: removable cases from a scan, an impression or both. → Denture Lab
Night Guards, Splints and Retainers
Hard, soft and dual-laminate guards and occlusal splints, thermoformed and checked against your scan and bite on an articulator. Hawley, Essix and bonded lingual retainers too. Best for: bruxism and clenching, occlusal splints and post-orthodontic retention. → Night Guards and Splints
Provisionals, Wax-Ups and Surgical Guides
PMMA provisionals, 3D-printed diagnostic wax-ups and models, and printed surgical guides. A wax-up or guide stage takes 2–3 working days. Best for: previewing esthetics, staged treatment and guided implant placement.
From Scan to Delivery in Five Steps
1. Send the Files Your Scanner Already Makes
We work with 3Shape TRIOS, Medit, iTero, CEREC from Dentsply Sirona, SHINING 3D Aoralscan, Planmeca and any scanner that exports open files, so you don’t need to buy a particular one. Send STL, PLY, OBJ, DCM or a full .3oxz case through 3Shape Communicate, Medit Link, your scanner’s cloud platform or WeTransfer. iTero and CEREC native files need to be exported to STL or PLY first.
Cases are milled from STL. Send a PLY whenever we need to see tissue color, as in anterior esthetic, implant bridge and full-arch cases. Include the prep arch, the opposing arch and a bite scan as separate files, one ZIP per case (not RAR) under one case ID, with STL under 150 MB per arch and PLY under 300 MB. → Rx and case checklist download
2. Your Scan Is Checked Within One Working Day
A CAD technician checks the margin, the mesh, the stitching and the bite, and tells you within one working day whether the case can go into design. A margin that’s blurred or hidden by tissue is the most common reason we ask for a rescan. We patch an incomplete scan only with your approval, and if information is missing or contradicts itself, production pauses until you confirm.
3. You Approve the Design Before We Mill
Our in-house CAD department of about 100 people designs every case. Full-arch and implant bridge work, custom abutments, bridges of four units or more, multiple anterior ceramics, complete dentures and tight-space cases always come to you for approval first, and you can ask to see any other design.
The preview marks our concerns, such as an unclear margin or an emergence profile that will be hard to clean. Two revisions are free, the dentist has the final say, and approval adds one to two days. We save your preferences for contacts, occlusion, form and shade, separately for each dentist in a group practice, and apply them to every case after that.
4. Milled or Printed, Then Finished by Hand
CAD/CAM handles the design and the milling or 3D printing. Our technicians do the layering, staining, glazing and polishing by hand, along with denture setup and base processing. Mills, furnaces and printers are calibrated every two weeks to a month, sintering programs are locked and logged, and new materials and software run on trial batches before they touch a client’s case.
5. Inspected, Traceable and Shipped Back on Us
Every case passes three checks, and final release comes from QC staff who don’t make restorations. Ask for QC photos if you want to see a case before it ships. Each case is traceable to its technicians, equipment and material batches, and we send material certificates in English on request. We pay to ship finished cases and remakes back to you.
Routine crowns and bridges take 2–3 working days in the lab, and complex implant and full-arch cases take 5–7, counted from the day a complete case arrives. Chinese public holidays and time spent waiting on you don’t count. If you send 10 or more cases a month, rush is free for every case type: we guarantee the ship date, and arrival depends on transit and customs.
Istar Digital as Your Digital Denture Lab
As a digital denture lab, we make complete and partial dentures three ways: fully digital, conventional, or a hybrid of the two. Which one fits depends on the tissue, not on the technology.
Intraoral scans still have limits on edentulous arches. A systematic review of scanning accuracy on edentulous arches concluded that direct intraoral scans can’t replace conventional impressions of completely edentulous arches, with the weakest accuracy in mobile areas such as the soft palate, vestibule and sublingual region. The payoff is real when the case suits it: a meta-analysis of milled, printed and conventional complete dentures found better retention and fewer appointments with CAD/CAM dentures, though it rested on six studies with high heterogeneity.
Fully digital. Where the ridge is firm and the borders are well defined, a scan works well. A milled base reproduces the approved design consistently and can be milled again from the same file; we also print bases.
Hybrid. Where the tissue is mobile, send a border-molded impression. We digitize it, design the denture digitally and process the final base by injection or heat curing. A milled base can’t add border detail the scan never captured.
Teeth are set from your Rx, clinical photos and, when you send it, the patient’s old denture, keeping what already works for the patient and correcting what doesn’t.
Every complete denture comes to you as a design to approve, then as a try-in before the final base is processed. A digital case usually reaches you one to two days sooner than the same case sent as an impression. If the patient needs a replacement later, your saved design file is a head start, though the tissue still needs a clinical check first. Denture bases carry a one-year warranty.
→ Materials, partial frameworks and denture repairs: Denture Lab
Digital Dental Design Services for Labs and In-House Mills
Our digital dental design services let you hand over just the step you’re short on: CAD design only, milling and sintering of your designs, or full production. All design is done by Istar Digital’s own CAD department.
Design-only. Send upper, lower and bite scans, ideally as STL, and we send back a design for your mill or printer. For labs in the US, our working day falls during your night, and design-only cases normally come back within 24 hours.
Milling-only. Send the design file with the material, tooth positions and thicknesses. We accept editable exocad and 3Shape files and designs built on your own material libraries. If a parameter is missing, we stop and ask rather than guess. When your implant library differs from ours, we use yours so the parts seat.
Who's Responsible When You Send the Design
When you ask us to mill your design as it is, we mill it as it is, so the design needs to be right before you send it. If we see an obvious problem, such as a thin wall or an undersized connector, we tell you before milling. If you still want it made after we’ve flagged the risk, we make it, and the remake risk stays with you.
If a case made to your design doesn’t seat or the occlusion is off, the remake is on you. If the porcelain chips or a crown or bridge fractures, it’s on us. Either way, send intraoral photos with the restoration seated and the reason for the remake.
Your Brand Stays Yours
Cases can go out with no Istar Digital name on the packaging, labels or paperwork, packed and labeled to your standard and named the way your system needs. We can ship straight to your dentist’s clinic, though the sender address on the waybill can’t be changed. We never contact your dentists, and we’ll sign an NDA to protect your pricing and client relationships.
Your Files and Your Patients' Data
Your own case ID is enough to match files to the Rx, and we recommend it.
Uploads, transfers and stored data are encrypted, and only our case coordinators, who sign confidentiality agreements, can open a case.
Scans, designs and case files belong to you. We use them only to make that case, never for other cases or to train software.
We never use case photos, models or patient details for marketing or training without written consent from you and the patient. We’ll sign an NDA or a data processing agreement on request.
Consistent Results as Your Case Volume Grows
The first case is easy to get right. The real test is case 300, so we build consistency into how accounts are run.
Larger accounts get a fixed technician team, and you can request a specific technician, designer or QC inspector.
Repeat work uses your approved shade references, photos and design templates, fixed material batches and firing parameters, and a reference sample that each batch is checked against.
When a large order arrives, cases already scheduled keep their dates and new volume is phased in. If a production problem affects your date, you hear about it when it happens, not on the day the case was due.
A dedicated team analyzes every remake, and you can see a quality trend report for your own cases.
Our four labs use nearly the same materials but run separate technician and service teams. If you prefer one team’s work, we route your cases to it.
Verify Istar Digital Before Your First Case
Whichever digital dental labs you’re comparing, ask for proof you can check yourself. Here’s ours.
Istar Digital Dental Lab is an FDA-registered establishment, Registration Number 3039441248, which you can look up in the FDA establishment registration and device listing database without an account. The listing covers custom crowns, bridges, inlays and onlays, veneers, custom abutments, implant superstructures, dentures and provisionals, but not implant bodies. Our labs run an ISO 13485 quality management system, and restorations for the EU follow the MDR custom-made device procedure, with a statement for each case.
Visit our labs in person or book a video tour, send us your supplier questionnaire, or schedule a remote or on-site audit. Crowns, bridges, ceramic veneers and implant restorations carry a 3-year warranty. → Remake and Warranty Policy
Frequently Asked Questions
Can I still send a physical impression?
Yes. VPS is our first choice, and we also accept condensation silicone and polyether, plus stone models, sectioned models with dies, implant models with analogs and 3D-printed models. Avoid alginate for international shipping: it loses water, shrinks and can grow mold in transit, which also creates a customs risk. Use our courier account if you like, declare the package truthfully as dental models or impressions, and send us the tracking number.
Can you copy an existing crown, a provisional or the opposite tooth?
Yes. Scan the reference, whether that’s an old crown, a provisional or the contralateral tooth, and we copy or mirror its form into the new restoration. We can also carry the function and anterior guidance of an approved provisional into the final work.
Can I see a mock-up before the final restorations?
Yes. We can make a diagnostic wax-up, a mock-up or a provisional first, so you can check form and esthetics with the patient before the final restorations are made.
What if I want changes after approving a design?
Tell us as early as you can. A change made soon after approval doesn’t affect the lead time, and the fee doesn’t change.
When can we reach your team?
You’ll have a dedicated manager and a fixed channel: email, WhatsApp or a video call, in English. Our team works 9:30 a.m. to 6:00 p.m. China time (UTC+8) and stays on until midnight for urgent cases. During working hours, technical questions usually get an answer within an hour; outside them, within 12 hours at most.
How do I report a problem with a delivered case?
Report it within 24 hours of receiving the case, with the case number, product, the reason and photos. We remake or adjust lab-side problems at no charge, such as open margins or contacts, high occlusion, a crown that doesn’t seat, or a denture that doesn’t seat or lifts. A change of shade or material, or a case made on your instruction from an impression we flagged as poor, isn’t covered.
Send Your First Digital Case
The quickest way to compare digital dental labs is to seat their work. Tell us which scanner you use, whether you need full production, design only or milling only, the cases you send most and your rough monthly volume. Your sales manager will reply with the price list and quotes itemized to what you need. Single trial cases are welcome, and an ongoing partnership works best with a regular flow of cases.