Inlays and Onlays
Istar Digital Dental Lab makes inlays and onlays, overlays and endocrowns for dental clinics, DSOs and dental labs. We press our dental inlays and onlays from Ivoclar IPS e.max Press lithium disilicate, design each one to the prep you send, and inspect it on the model before it leaves our labs in Shenzhen and Huizhou.
Partial-coverage work succeeds or fails at the margin and at the thinnest point of the ceramic. So we read the prep, scan and bite before production starts, and we tell you early when something won’t work.
Inlays, Onlays, Overlays and Endocrowns We Make
“Overlay” means different things in different practices. On the Rx, say whether you want every cusp covered and whether any axial wall is part of the design. We’ll build exactly that instead of guessing.
Onlay or crown after root canal treatment?
For a root-canal-treated molar that needs one or more cusps covered, we recommend an onlay over a full crown. It removes less sound tooth structure, and in our experience it performs better. When you’ve decided on full coverage, our e.max dental crowns are made on the same pressed-ceramic line.
Pressed IPS e.max: The Material Behind Our Dental Inlays and Onlays
We make inlays, onlays and overlays by pressing IPS e.max Press ingots, not by milling. Ivoclar lists inlays, onlays (including occlusal veneers of at least 1.0 mm) and partial crowns among the indications for IPS e.max Press. Lithium disilicate has a flexural strength of 250–400 MPa, far above the 50 MPa minimum that ISO 6872 sets for ceramic single-unit inlays and onlays, according to the ADA’s overview of indirect-restoration materials.
Pressed e.max partial restorations are bonded with a resin cement, such as Variolink or RelyX Ultimate. Plan for isolation that allows adhesive bonding before you choose this design.
Shade
A small inlay borrows color from the tooth around it, and the prepared tooth shows through the ceramic. Send two photos: the natural tooth next to the shade tab, and the prepared tooth next to the shade tab. From the second photo we judge whether the restoration needs masking. Intraoral photos or a short video help us match translucency to the neighboring teeth.
Other materials and endocrowns
If your Rx names a different material or brand, or you’re ordering an endocrown, we confirm the material with you before production starts. We never change the material on a case without your OK, written or verbal. For an overview of our ceramic options, see ceramic inlays and onlays and our e.max dental lab.
What We Need From the Prep, the Scan and the Rx
An inlay or onlay is held by the bond, not by the retentive walls of a crown prep. A margin we can’t read, or clearance we can’t fit ceramic into, shows up at seating. These are the points we check on every case.
Clearance and thickness
Posterior restorations need 0.8–2.0 mm, depending on the material. For IPS e.max Press, Ivoclar sets 1.0 mm as the minimum for occlusal veneers, and we follow Ivoclar’s instructions for the other partial-coverage designs.
Note it on the Rx. We increase the occlusal thickness and keep contacts flat and evenly spread to distribute the load.
Write “occlusal space inadequate” on the Rx with the space that remains. Our technicians measure clearance on the model. If it falls short, we contact you before pressing. Your options are to adjust the prep, change the material or adjust the opposing tooth. We can also put a note in the package showing which tooth needs how many millimeters of reduction.
Keep the prep free of undercuts. An undercut stops the restoration from seating and makes it bind.
Use a shoulder or chamfer for pressed ceramic. A knife-edge margin leaves the ceramic too thin at the edge and prone to chipping.
Margins, contacts and bite
- Finish line: shoulder or chamfer, and whether it sits supragingival or subgingival, in millimeters.
- On a scan, trace the margin manually. Don’t rely on the software’s automatic detection.
- Proximal contacts: light, normal or tight, and where the contact area should sit (higher or lower).
- Bite: a bite record in maximum intercuspation. The opposing scan should cover the whole arch back to the last molar, plus two to three teeth on each side of the prep and the surrounding gingiva.
- Deep proximal boxes: retract and dry before scanning or taking the impression. Scan slowly around the margin, and capture a little of the area below the finish line, so the margin reads as one continuous line.
Scans and impressions
We accept scans from 3Shape TRIOS, Medit, iTero, CEREC/Primescan, Shining3D Aoralscan, Planmeca and any scanner that exports open files. You can send cases through 3Shape Communicate, Medit Link, other scanner portals or WeTransfer. Our digital dental lab workflow covers the details.
- Formats: STL is enough for a posterior inlay or onlay. Send PLY when you want us to see tooth and gum color. Export STL or PLY from iTero and CEREC. We can’t open their proprietary files.
- File set: one ZIP per case (not RAR), with separate prep, opposing and bite scans, every file named with the same case ID, and only Latin characters in file names.
- We ask for a rescan when the margin is blurred, missing or covered by tissue, the mesh has holes we can’t repair, stitching shows a step, or the scan is missing adjacent teeth, the opposing arch or the bite.
- Impressions: VPS is preferred; polyether and condensation silicone are also accepted. Stone models, sectioned die models and 3D-printed models all work. Retake the impression if voids, drags or distortion touch the margin, a contact or a key occlusal area.
Prep check on your scan
Not sure the clearance is there, or that the margin will read? Send us the prep scan and ask for a prep check. Our technicians review clearance, margin readability, undercuts and scan coverage. They mark any problem areas on screenshots, and your case coordinator posts them in your case group with what needs to change.
Design approval and provisionals
- Design approval: ask to see the design before we press. You can request changes through your case coordinator. Approval adds 1–2 working days.
- Provisionals: we can supply provisionals for inlay and onlay cases, in composite or PMMA, including 3D-printed provisionals. Ask for them on the Rx.
How We Check Each Inlay and Onlay Before It Ships
Before shipping, a 25-person QC team checks every restoration against your Rx and the approved design:
- margin adaptation and the intaglio surface
- complete seating on the die
- proximal contact tightness
- occlusion in centric, protrusive and lateral movements
- form, contour, esthetics and polish
- no cracks, pores or chips; pressed ceramic is inspected under a dedicated QC light
Lab-wide, 95% of cases pass final inspection. That’s our internal check. The share of cases clients send back for a remake is a separate measure, and it runs at 2–3% across the lab. Finished restorations travel in foam-filled boxes so they don’t knock against anything in transit.
Choosing Istar Digital as Your Inlay Dental Lab
Istar Digital was founded in 2012 and runs four dental labs in Shenzhen and Huizhou, China, with about 460 people, including 100 in design. Every step is done in house, with no outsourcing, and each material has its own production area. You get your own case group, so a question about a margin or a contact reaches the people working on your case, not a general inbox. For an inlay dental lab, that direct line matters: the restoration depends on details measured in fractions of a millimeter.
Lead times and shipping
- In the lab: 5–7 working days for most inlays, onlays, overlays and endocrowns; 2–3 working days for simple cases. Transit time comes on top.
- Rush cases: free for any case if you send 10 or more cases a month. We guarantee the ship date. The arrival date depends on customs, so we can’t guarantee it.
- Shipping: digital cases need no inbound shipping. You pay to send physical impressions or models to us; we pay to ship finished work back, including remakes.
Warranty and remakes
Inlays, onlays, overlays and endocrowns carry a 3-year warranty. We remake free of charge when the problem is on our side: open margins, open contacts, high occlusion, a restoration that doesn’t seat, an inaccurate shade, visible flaws or poor form. A remake is chargeable if you change the shade or material after production, or if we flagged an unclear impression and you asked us to proceed anyway.
Pricing and compliance
- Quotes are itemized to your requirements, not bundled into one price.
- Single trial cases are welcome. An ongoing partnership suits a regular flow of cases.
- FDA: Istar Digital is an FDA-registered establishment, Registration Number 3039441248. You can look it up in the FDA establishment registration and device listing database. Our device listing includes inlays and onlays.
- EU: custom restorations follow the MDR custom-made device procedure.
- Quality system: the lab works under ISO 13485.
FAQ
An inlay won't seat fully. What should we check first?
Check in this order: margins, then proximal contacts, then the prep. Tight contacts usually come from an overcontoured contact point or an undercut on the adjacent tooth that wasn’t accounted for. A high bite usually points to an overerupted opposing tooth or an inaccurate bite record. An open margin usually traces back to an unclear impression, die trimming or material shrinkage.
What do we send back if an onlay needs a remake?
It depends on the reason. If the onlay seated well but fractured, we can usually remake it from the original data. For a fit, margin or occlusion problem, we need a new scan, model or impression. Physical restorations need to come back to us; for digital cases, returning the restoration depends on the reason for the remake.
If we re-prep the tooth for a remake, is it still free?
Yes, if the remake is one we owe you, a new prep doesn’t change that. If the original restoration wasn’t a remake case on our side, the new prep is charged as a new case.
Can a dental lab send its own design for production only?
Yes. We accept editable exocad and 3Shape design files. Send the design with the material, tooth number and thickness parameters. We produce to your design as sent. If we see an obvious problem, we tell you first, and if you confirm, we make it as designed.
Can you document the material used on a case?
Yes. On request, we provide the brand, country of origin, lot number and certificate of conformity for the materials used on that case.
What if a restoration arrives damaged?
Within 24 hours of delivery, send us an unboxing video that shows the courier label, along with the damaged piece, and keep the original packaging. With complete evidence, we remake it free of charge. Damage after delivery is charged.
Send Your First Inlay or Onlay Case
Start with one case and judge the fit, contacts and margins yourself. Download the Rx form, write the design, material, shade and contact preferences in the notes, and follow our case-sending guide.
Prefer to see the lab first? Book a factory or video visit, or ask for the price list and our team will send it.